Reasons why Pokémon GPS does not Work On Xiaomi Redmi 13C? | Dr.fone

Reasons why Pokémon GPS does not Work On Xiaomi Redmi 13C? | Dr.fone

Lary Lv13

Reasons why Pokémon GPS does not Work On Xiaomi Redmi 13C?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

  1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
  2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

GPS Signal Not Found Pokemon

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Turn On Wi Fi iPhone

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Reload game iPhone

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Xiaomi Redmi 13C device to restart. In most cases restarting the Xiaomi Redmi 13C device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

drfone home

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

virtual location 1

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

virtual location 3

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

virtual location 04

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

virtual location 5

https://techidaily.com

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

virtual location 6

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Turn on location service andriod

Method 2: Restart the Xiaomi Redmi 13C device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Restart android phone

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Update pokemon go android

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

The Ultimate Guide to Get the Rare Candy on Pokemon Go Fire Red On Xiaomi Redmi 13C

In all Pokemon Go versions, a Rare Candy will automatically uplift you to the next level. These cadies are powerful and come with a lot of extra rewards. That said they are also very difficult to find, especially in Pokemon Fire Red. This article will show you some of the ways in which you can find Rare Cady, and level up quickly to improve your status in the game.

https://techidaily.com

Part 1: What is the rare candy in Pokémon Go Fire Red?

All Pokemon Go game variations have Rare Candy, and they are mainly used to upgrade the level of any Pokemon by 1. If you were at level 9, you automatically go up to level 10, etc. This will save you from having to engage in battles to raise your level. You may also earn the level attacks that you would have earned at that level, even without having to fight.

There are a limited number of Rare Candy in Pokemon Go Fire Red. However, you can get unlimited Rare Candies by using Pokemon Go Fire Red Rare Candy cheat codes through GameShark or Action Replay. You may also get them through cloning your existing Rare Cady.

When you use a Rare Candy, you get enough Exp. Points to move to the next level. This means that it is best to use them for getting to the next level, especially when it becomes too challenging. Although you get to the next level, you will not earn any Effort Value Points, which will make your Pokemon weaker than it would have been if you had leveled up through training.

Pokemon Rare Candy Trainer Card

Part 2: How to get rare candy in Pokemon Go Fire Red?

There are three main ways in which you can get Rare Candy in Pokemon Go Fire Red. The first one is using a location spoofer to catch rare candy without moving. The second one involves going to areas where you can find the Rare Cady and the last one involves using a Fire Red Rare Candy Code.

https://techidaily.com

Getting Pokémon GO Fire Red Rare Candy without Walking/Moving

Searching for the simplest way to collect rare candies in Pokémon GO? If your answer is affirmative, there is good news: We have the perfect tool for you. Wondershare Dr.Fone - Virtual Location allows you to play Pokémon GO from the comfort of your house. You no longer need to walk miles to visit gyms and PokéStops or hatch eggs.

All of this can be done without even moving from your bed. Dr.Fone – Virtual Location facilitates you in mimicking realistic movements of the map to play Pokémon GO. To make this process easier for you, there is also a joystick included in the tool to help you simulate movement. Furthermore, it comes with pre-built functions such as a one-stop route and muti-stop route to further help you.

Notable Characteristics of Dr.Fone - Virtual Location

  1. Not only can you follow the routes on the map, but you can also import and export route files.
  2. There is no need to jailbreak your iOS device to spoof location when using Dr.Fone - Virtual Location.
  3. When spoofing your location on iOS devices, Dr.Fone supports up to 5 devices from a single Mac or PC.

Instructions for Getting Pokémon GO Fire Red Rare Candy Without Walking/Moving

Dr.Fone - Virtual Location offers a simple and easy-to-understand way to spoof your location when playing Pokémon GO. The following are the steps you need to follow for location spoofing:

Step 1: Connect to Dr.Fone - Virtual Location and Set Target Location

With Dr.Fone - Virtual Location launched on your computer, connect your smartphone. Once on the map screen, click the “Teleport Mode” icon, the first one, from the toolbar near the top-right corner. Now tap the search bar on the top left corner, enter the targeted location, and press “Enter.”

search for the required location

Step 2: Teleport to Targeted Location

The cursor on the map screen will move to the location you have entered on the map. If you want to move there when spoofing your location, click “Move Here.” It will change the location on the map screen and on your device to the location you entered. You can confirm it by accessing your smartphone and opening a map application.

move to location virtually

Step 3: Simulate Movement and Configure Route

To simulate movement when spoofing your location, you can select either “One-Stop Route” or “Multi-Stop Route.” Both are the third and fourth options, respectively, on the toolbar near the top right corner. Now, choose the stop points, type of trip, walking speed, and other parameters. Once you are done, tap “Move Here” or “Start Moving” to initiate the movement.

set route parameters to start moving

Getting Pokemon Go Fire Red Rare Candy Normally

You would have to visit certain locations in order to get Pokemon Go Rare Candy in the normal way. The locations which have been found to give most Rare Candy are:

  • Take a look behind the house in Cerulean City
  • Go to Mount Moon and get one
  • Check at the Rocket Game corner
  • Take a journey to the Ghost Tower
  • When you get to the Safari Zone Warden’s House, check behind the boulder.
  • You may also use Meowth or any other Pokemon that has Pickup abilities and try your luck.

Getting Pokémon Go Fire Red Rare Candy with cheat codes

The best way to go about this is to use a Pokemon Go Fire Red emulator on your computer and then use the fire red chat code shown below and follow the simple instructions.

Look for the Pokemon Go Fire Red codes posted on various user sites.

Use GameShark or My Boy game emulator to install the codes and then get the Rare Candy that you need.

The cheat code for Pokemon Go Fire Red Candy is:

https://techidaily.com

Part 3: How do you get unlimited rare candies in Pokemon Red?

Sometimes, you don’t want to keep adding Pokémon Go Fire Red Rare candy codes one at a time. You simply want to Master Code that will help you get the Rare Candy whenever you need them.

This is how you go about getting unlimited Rare Candy on Pokemon Go Fire Red.

82025840 0044

It can be used to get a single Rare Candy or to unlimited Rare Candy as shown below:

Pokemon Go Fire Red Rare Candy Storage

https://techidaily.com

Pokemon Go Cheat Code for Unlimited Rare Candies

82025840 0044

How to use the code:

Step 1 – Turn off or delete any other code that you may have stored.

Step 2 – go to a Pokéstop and then save your game.

Step 3 – create a new cheat as follows;

  • Code Name: Rare Candy
  • Code Type: CodeBreaker
  • Code: 820258400044

Wait for it to be activated and then save it.

Enter details of the cheat code

Step 4 – Enter the Pokéstop and deactivate the cheat code.

Step 5 – Go to your computer and type in “PC > Item Storage”.

Step 6 – Withdraw a SINGLE Rare Candy

Step 7 – check if you have double Rare Candy entries in your storage. If they are not duplicated, then the cheat has worked as it should. If they are duplicated, then you have to close the game and redo all the steps above.

Step 8 – Now exit and then go back to your Item Storage, where you can withdraw as many Pokemon Go Fire Red Rare Candies as you would want. Simply pick a number between 001 and 999, but never use the down arrow.

In conclusion

Getting Rare Candy in Pokemon Go Fire Red is a difficult task. These cadies are not easy to find and they may not be in a location that you can access easily. The article shows you the locations at which you can collect Pokemon Go Fire Red Candy using the normal gameplay. You may also use Pokemon Go GameShark cheat codes and get unlimited Rare Candy to use whenever you need them.

https://techidaily.com

How to Come up With the Best Pokemon Team On Xiaomi Redmi 13C?

If you have been playing Pokemon games (like Sun/Moon or Sword/Shield), then you must be familiar with their team building. To succeed, players are encouraged to create teams of their Pokemons that they have to use to complete missions. Though, it might take a while to master how you create a winning team. To help you, I have come up with some smart tips that would let you come up with some amazing Pokemon teams.

Pokemon Team Building Banner

Part 1: What are Some Good Pokemon Team Examples?

To understand the dynamics of team composition, you should know that there are ideally different kinds of Pokemons:

  • Sweeper: These Pokemons are mostly used to attack as they can do a lot of damage and even move swiftly. Though, they have low defense stats and can be of a physical or special type.
  • Tanker: These Pokemons have high defense stats and can take a lot of damage. Though, they have slow movement and low attacking stats.
  • Annoyer: They are known for their fast movement and while their damage might not be so high, they can annoy your opponents.
  • Cleric: These are supportive Pokemons that are mostly used to heal or boost the stats of other Pokemons.
  • Drainer: These are also supportive Pokemons, but they can drain the stats of your opponents while healing your team.
  • Wall: These are tougher than tank Pokemons and can take a substantial amount of damage from sweepers.

hola free vpn

Based on these different types of Pokemons, you can come up with the following teams to win your next battle:

1. 2x Physical Sweeper, 2x Special Sweeper, Tanker, and Annoyer

If you want to have an attacking team, then this would be the perfect combination. While the annoyer and tanker would drain the HP of the opponents, your sweeper Pokemons can finish them with their high attacking stats.

2. 3x Sweepers (Physical/Special/Mixed), Tanker, Wall, and Annoyer

This is one of the most balanced Pokemon teams that would work in almost every situation. In this, we have a tanker and a wall to take damage from the opponent’s Pokemon. Also, we have three different types of sweepers to do maximum damage.

Balanced Pokemon Teams

3. Drainer, Tanker, Cleric, and 3 Sweepers (Physical/Special/Mixed)

In some situations (when there are lots of sweepers in the opponent’s team), this team would excel. Your support Pokemons (drainers and clerics) would boost the HP of sweepers while the tanker would take the damage.

4. Rayquaza, Arceus, Dialga, Kyogre, Palkia, and Groudon

This is one of the most legendary teams in Pokemon that any player can have. The only issue is catching these legendary Pokemons can take a lot of time and effort, but it would certainly be worth it.

5. Garchomp, Decidueye, Salazzle, Araquanid, Metagross, and Weavile

Even if you don’t have a lot of experience in the game, you can try this power-packed team in Pokemon games like Sun and Moon. It has the perfect balance of attacking and defensive Pokemons that would excel in every situation.

Attacking Pokemon Teams

Part 2: Things to Consider while Creating your Pokemon Team

Since there could be so many ways for coming up with a Pokemon team, I would recommend following these suggestions:

Tip 1: Consider your strategy

The most important thing that you need to know is the overall strategy that you have to focus on game. For instance, at times, players would like to play defensively while others want to focus on attacking. Therefore, you can come up with a team composition according to your needs.

Tip 2: Try to attain a balanced team

Needless to say, if you have all attacking or all defensive Pokemons in your team, then you might not get the desired results. That’s why it is recommended to have a mixed bag of sweepers, healers, tankers, annoyers, etc. in your team.

https://techidaily.com

Tip 3: Don’t pick Pokemons with common weaknesses

It is always recommended to have a diverse team so that your opponent can’t harass you. For instance, if two or more Pokemons have the same type of weakness, then your opponent can easily win by counter-picking Pokemons.

Tip 4: Practice and alter your team

Even if you have a decent team, it doesn’t mean that it would excel in all scenarios. It is always recommended to keep practicing with your team every now and team. Also, feel free to edit your team by swapping Pokemons. We have discussed how to edit Pokemon teams in the next section.

https://techidaily.com

Fix 5: Research and pick rare Pokemons

Most importantly, keep looking up for Pokemon team suggestions by experts online and via other Pokemon-related communities. Also, a lot of players suggest picking rare or legendary Pokemons as they have limited weaknesses, making them harder to be countered.

Part 3: How to Edit your Pokemon Team in the Game?

Ideally, you can come up with all kinds of teams in Pokemon games. Though, there are times when we simply wish to edit the team according to different situations. This can easily be done by visiting your Pokemon team in the game.

The overall interface would largely vary on the game that you are playing. Let’s take the example of Pokemon Sword and Shield. At first, you can just go to the interface and select your team. Now, select the Pokemon of your choice and from the provided options, click on “Swap Pokemon”. This will provide a list of the available Pokemons that you can browse and choose a Pokemon to swap with.

Swap Pokemon in a Team

There you go! By following these tips, you would be able to come up with a winning Pokemon team for different games. I have included various examples of Pokemon team combinations here that you can also apply. Besides that, you can also follow the above-listed tips to create different styles of amazing teams in Pokemon games like Sword/Shield or Sun/Moon like a pro.


Also read:

  • Title: Reasons why Pokémon GPS does not Work On Xiaomi Redmi 13C? | Dr.fone
  • Author: Lary
  • Created at : 2024-10-04 18:01:36
  • Updated at : 2024-10-10 19:36:46
  • Link: https://android-pokemon-go.techidaily.com/reasons-why-pokemon-gps-does-not-work-on-xiaomi-redmi-13c-drfone-by-drfone-virtual-android/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
Reasons why Pokémon GPS does not Work On Xiaomi Redmi 13C? | Dr.fone