Reasons why Pokémon GPS does not Work On Tecno Spark 10 4G? | Dr.fone

Reasons why Pokémon GPS does not Work On Tecno Spark 10 4G? | Dr.fone

Lary Lv13

Reasons why Pokémon GPS does not Work On Tecno Spark 10 4G?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

  1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
  2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

GPS Signal Not Found Pokemon

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Turn On Wi Fi iPhone

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

www.sentrypc.com

Reload game iPhone

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Tecno Spark 10 4G device to restart. In most cases restarting the Tecno Spark 10 4G device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

drfone home

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

virtual location 1

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

virtual location 3

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

virtual location 04

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

virtual location 5

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

virtual location 6

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Turn on location service andriod

LYRX is an easy-to-use karaoke software with the professional features karaoke hosts need to perform with precision. LYRX is karaoke show hosting software that supports all standard karaoke file types as well as HD video formats, and it’s truly fun to use.
LYRX Karaoke Software MAC/WINDOWS (Includes Activation For 3 Machines)

Method 2: Restart the Tecno Spark 10 4G device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Restart android phone

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Update pokemon go android

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

How Do You Get Sun Stone Evolutions in Pokémon For Tecno Spark 10 4G?

![pokémon go sun stone](https://images.wondershare.com/drfone/article/2024/03/sun-stone-evolutions.jpg)

Though you can certainly catch some powerful Pokémon in Pokémon Go just by playing the game, exploring the wilderness, and joining raids, it’s not enough. Evolving your Pokémon is how you advance through the game, level up, and become a better catcher.

Now, while some of your Pokémon in the game can evolve with the utmost ease, others require a bit more of a special touch, and that special touch comes in the form of evolution items. Necessary for certain species of Pokémon, evolution items can be somewhat elusive – one of the rarer ones being the Sun Stone.

Pokémon Go Sun Stone evolutions can improve your entire in-game experience, so learn all about them below.

DEX 3 RE is Easy-To-Use DJ Mixing Software for MAC and Windows Designed for Today’s Versatile DJ.

Mix from your own library of music, iTunes or use the Pulselocker subsciprtion service for in-app access to over 44 million songs. Use with over 85 supported DJ controllers or mix with a keyboard and mouse. 

DEX 3 RE is everything you need without the clutter - the perfect 2-deck mixing software solution for mobile DJs or hard-core hobbiests. 
PCDJ DEX 3 RE (DJ Software for Win & MAC - Product Activation For 3 Machines)

Part 1. What Are Sun Stones in Pokémon Go?

sun stone and four pokémon

The Sun Stone is one of eight evolution items you’ll need in Pokémon Go. Glowing bright red and orange, it is effortless to recognize in the game, immediately catching your eye even in the busiest of environments. Consider yourself lucky if you come across one casually.

Part 2. Pokémon Go Sun Stone Evolutions Explained

five of the evolution items in pokémon go

Evolutions in Pokémon Go aren’t always the same. You’ll most commonly get species-specific candy used for evolutions whenever you catch a specific Pokémon. Depending on the species, you’ll need more or less candy to evolve them. (And don’t worry, evolutions don’t affect the total number of Pokémon in your collection).

Depending on the specific Pokémon you want to evolve, you might need additional items or even need to perform a particular task. Some Pokémon will need to be walked as your Buddy Pokémon before they can evolve. Others can be evolved through trading them. Others can only evolve with the help of evolution items like the Sun Stone.

Pokémon Sun Stone evolutions will require you to collect the Sun Stone and a certain amount of candy (which can vary by Pokémon).

You can always check out how to evolve your Pokémon in your Pokédex.

Part 3. Which Pokémon Evolve With Sun Stones?

sunken and sunflora in pokémon go

Every Pokémon you come across in the game is different, and they’ll all have varying evolution requirements. Considering how elusive the Sun Stone can be, it’s great that only a few Pokémon require it. Check out the following Pokémon Sun Stone evolution list.

Pokémon Sun Stone Evolution List

Pokémon Items Needed Sun Stone Evolutions
Gloom Sun Stone and 100 Oddish candy Bellossom
Sunkern Sun Stone and 50 Sunkern candy Sunflora
Cottonee Sun Stone and 50 Cottonee candy Whimsicott
Petilil Sun Stone and 50 Petilil candy Lilligant
Helioptile Sun Stone and 50 Helioptilecandy Heliolisk

Part 4. How to Acquire Sun Stones on Pokémon Go

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

sun stone and helioptile in pokémon go

While certainly not the rarest evolution item in Pokémon Go, that title belonging to the ever-elusive Axew’s Unova Stone, the Sun Stone will still make you work for it. Only the lucky few are able to come across it randomly, as it comes with a mere 1% drop chance.

Fortunately, for all those unlucky ones, you can acquire the Sun Stone to complete your Pokémon evolutions in a few different ways.

Special Events

Partaking in Pokémon Go special events is almost always a lucrative experience. You can get excellent XP bonuses, come across special Pokémon, enjoy more candy and stardust, encounter special raid bosses, and so much more. Of course, you can also increase your chances of encountering rare evolution items like the Sun Stone.

Pokémon Go will frequently have multiple special events happening every month. Some of the events happening in February 2024 include:

  • Lunar New Year – February 5 to February 11;
  • Carnival of Love – February 13 to February 15;
  • Road to Sinnoh – February 19 to February 23.

You’ll be notified of any ongoing special events as soon as you start your game, so check your phone at least once daily. While partaking in a special event doesn’t guarantee you’ll get a Sun Stone, there’s always a possibility!

Field Research

Throughout your game, Professor Willow will need your help to learn more about Pokémon, so he’ll send you on different research tasks. Of course, you’ll always be generously rewarded for your efforts.

Among the different types of research the professor sends you is field research. You can collect your field research tasks by spinning the Photo Disc at a PokéStop. You can only collect and work on three field research tasks simultaneously, though a fourth one will open if you receive bonus research. Moreover, you and your friends can work together to complete the same field research if you all go to the same PokéStop on the same day.

As you’re completing your field research tasks, you can collect your rewards, earn stamps, and unlock breakthroughs. Hopefully, one of the rewards you receive will include the Sun Stone, allowing you to evolve some of your Pokémon.

Special Research

With field research, you have some flexibility. You can visit PokéStops when you’re up for them, and you can even discard some tasks if they’re too difficult for you. With special research, you don’t have all that much flexibility.

Professor Willow will contact you directly and give you specific tasks you must complete. You can’t disregard or discard them.

As a rule, special research will be more involved and will likely last longer than field research. However, your rewards will usually be much more valuable, and you’ll exponentially increase your chances of obtaining a Sun Stone.

Gyms and PokeStops

Of course, you can always earn valuable rewards by simply visiting gyms and PokéStops and spinning the Photo Discs. Create a 7-day PokéStop streak, as that will guarantee you’ll get an evolution item.

While you’ll usually get a more common evolution item after your 7-day streak, you might get a Sun Stone or something even more valuable.

Usually, it’s in your best interest to go to more popular areas with more PokéStops, as you’ll be able to make more spins faster.

Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.

Part 5. How to Gather Sun Stones Efficiently

Text” sun stone in pokemon go

Field research, special research, and spinning gyms and PokéStops are the only ways you could acquire the Sun Stone in Pokémon Go. However, that doesn’t mean you’ll need to grind day in and day out, trying to explore as much of your neighborhood as possible while playing. You can always make things a bit more efficient than that.

Complete Field Research Tasks Quickly

Mention Dr. Fone Virtual Location and Add Steps.

To complete field research and increase your chances of getting a Sun Stone, you’ll usually have to spend a lot of your time wandering around your neighborhood. After all, Pokémon Go is a location-based game that requires you to go out into town and wander the streets of your city. There’s virtually no task you can complete from the comfort of your home unless you have an ace up your sleeve.

Wondershare Dr.Fone virtual location can be a game-changer for completing your field research tasks quickly. A tool designed to spoof your location and make it seem like you’re out and about while you’re actually just relaxing at home, it can help you finish your field research without much fuss.

You can use the Dr. Fone virtual location to set your location to anywhere in the world. Create a one-stop or multi-stop route to make the game believe you’re moving around, or even use the jump-teleport mode to “transfer” to a more resource-rich location. However, be careful with the jump-teleport mode, as it can betray the fact that you’re using a location spoofer.

To get started with Wondershare Dr.Fone and complete your field research tasks, you must follow a few steps:

  1. Download and launch Wondershare Dr.Fone on your computer;
  2. Connect your phone to your computer;
  3. Go to Toolbox > Virtual Location > Get Started;

get started with wondershare dr.fone

  1. On the map that shows up, click on No Devicein the upper right-hand corner;
  2. You’ll see a list of all connected devices, select your phone;

choose the Tecno Spark 10 4G device you want to connect to dr.fone

  1. On your phone, tap Allow USB Debugging;
  2. On your phone, go to Developer Options> Select mock location app;
  3. Select Fone.

set up mock location on your phone

From there, you can easily set up your route, change your location, and simulate movement. With Wondershare Dr.Fone, you’ll have intuitive keyboard controls, 360-degree directions, and automated movement. So, as soon as you set things up in the app, you can start playing the game, completing your field research tasks, and, hopefully, acquiring your Sun Stones.

Pay Attention to Community Days and Special Events

Finally, to start getting Sun Stones and other rarer items more efficiently, you’ll always want to pay close attention to community days and special events. Pokémon Go is a very active game with frequent high-rewarding events that could happen at any time. Since these events are time-limited, you’ll always want to know precisely when they start and end.

Fortunately, finding this out is pretty easy. Just keep track of Pokémon Go on social media or visit the official Pokémon Go website to find out more. All events will be announced ahead of time so that you can prepare.

Conclusion

Acquiring Sun Stones for Pokémon evolutions can be quite a hassle. This rare evolution item can be a tricky find. Still, simply playing the game and joining all events, completing your research tasks, and more can significantly increase your chances of coming across a Sun Stone – especially if you have the help of apps like Wondershare Dr.Fone.

How to Come up With the Best Pokemon Team On Tecno Spark 10 4G?

If you have been playing Pokemon games (like Sun/Moon or Sword/Shield), then you must be familiar with their team building. To succeed, players are encouraged to create teams of their Pokemons that they have to use to complete missions. Though, it might take a while to master how you create a winning team. To help you, I have come up with some smart tips that would let you come up with some amazing Pokemon teams.

Pokemon Team Building Banner

Greeting Card Builder

Part 1: What are Some Good Pokemon Team Examples?

To understand the dynamics of team composition, you should know that there are ideally different kinds of Pokemons:

  • Sweeper: These Pokemons are mostly used to attack as they can do a lot of damage and even move swiftly. Though, they have low defense stats and can be of a physical or special type.
  • Tanker: These Pokemons have high defense stats and can take a lot of damage. Though, they have slow movement and low attacking stats.
  • Annoyer: They are known for their fast movement and while their damage might not be so high, they can annoy your opponents.
  • Cleric: These are supportive Pokemons that are mostly used to heal or boost the stats of other Pokemons.
  • Drainer: These are also supportive Pokemons, but they can drain the stats of your opponents while healing your team.
  • Wall: These are tougher than tank Pokemons and can take a substantial amount of damage from sweepers.

hola free vpn

Based on these different types of Pokemons, you can come up with the following teams to win your next battle:

1. 2x Physical Sweeper, 2x Special Sweeper, Tanker, and Annoyer

If you want to have an attacking team, then this would be the perfect combination. While the annoyer and tanker would drain the HP of the opponents, your sweeper Pokemons can finish them with their high attacking stats.

Software Update Pro - Check and update software installed on your computer.

2. 3x Sweepers (Physical/Special/Mixed), Tanker, Wall, and Annoyer

This is one of the most balanced Pokemon teams that would work in almost every situation. In this, we have a tanker and a wall to take damage from the opponent’s Pokemon. Also, we have three different types of sweepers to do maximum damage.

Balanced Pokemon Teams

3. Drainer, Tanker, Cleric, and 3 Sweepers (Physical/Special/Mixed)

In some situations (when there are lots of sweepers in the opponent’s team), this team would excel. Your support Pokemons (drainers and clerics) would boost the HP of sweepers while the tanker would take the damage.

4. Rayquaza, Arceus, Dialga, Kyogre, Palkia, and Groudon

This is one of the most legendary teams in Pokemon that any player can have. The only issue is catching these legendary Pokemons can take a lot of time and effort, but it would certainly be worth it.

5. Garchomp, Decidueye, Salazzle, Araquanid, Metagross, and Weavile

Even if you don’t have a lot of experience in the game, you can try this power-packed team in Pokemon games like Sun and Moon. It has the perfect balance of attacking and defensive Pokemons that would excel in every situation.

Jet Profiler for MySQL, Enterprise Version: Jet Profiler for MySQL is real-time query performance and diagnostics tool for the MySQL database server. Its detailed query information, graphical interface and ease of use makes this a great tool for finding performance bottlenecks in your MySQL databases.

Attacking Pokemon Teams

Part 2: Things to Consider while Creating your Pokemon Team

Since there could be so many ways for coming up with a Pokemon team, I would recommend following these suggestions:

Simple and intuitive video editing
🎬 Nero Video:
The powerful video editing program for your Windows PC

Tip 1: Consider your strategy

The most important thing that you need to know is the overall strategy that you have to focus on game. For instance, at times, players would like to play defensively while others want to focus on attacking. Therefore, you can come up with a team composition according to your needs.

Tip 2: Try to attain a balanced team

Needless to say, if you have all attacking or all defensive Pokemons in your team, then you might not get the desired results. That’s why it is recommended to have a mixed bag of sweepers, healers, tankers, annoyers, etc. in your team.

Tip 3: Don’t pick Pokemons with common weaknesses

It is always recommended to have a diverse team so that your opponent can’t harass you. For instance, if two or more Pokemons have the same type of weakness, then your opponent can easily win by counter-picking Pokemons.

Tip 4: Practice and alter your team

Even if you have a decent team, it doesn’t mean that it would excel in all scenarios. It is always recommended to keep practicing with your team every now and team. Also, feel free to edit your team by swapping Pokemons. We have discussed how to edit Pokemon teams in the next section.

Fix 5: Research and pick rare Pokemons

Most importantly, keep looking up for Pokemon team suggestions by experts online and via other Pokemon-related communities. Also, a lot of players suggest picking rare or legendary Pokemons as they have limited weaknesses, making them harder to be countered.

Part 3: How to Edit your Pokemon Team in the Game?

Ideally, you can come up with all kinds of teams in Pokemon games. Though, there are times when we simply wish to edit the team according to different situations. This can easily be done by visiting your Pokemon team in the game.

The overall interface would largely vary on the game that you are playing. Let’s take the example of Pokemon Sword and Shield. At first, you can just go to the interface and select your team. Now, select the Pokemon of your choice and from the provided options, click on “Swap Pokemon”. This will provide a list of the available Pokemons that you can browse and choose a Pokemon to swap with.

Swap Pokemon in a Team

There you go! By following these tips, you would be able to come up with a winning Pokemon team for different games. I have included various examples of Pokemon team combinations here that you can also apply. Besides that, you can also follow the above-listed tips to create different styles of amazing teams in Pokemon games like Sword/Shield or Sun/Moon like a pro.


  • Title: Reasons why Pokémon GPS does not Work On Tecno Spark 10 4G? | Dr.fone
  • Author: Lary
  • Created at : 2024-07-23 03:51:36
  • Updated at : 2024-07-24 03:51:36
  • Link: https://android-pokemon-go.techidaily.com/reasons-why-pokemon-gps-does-not-work-on-tecno-spark-10-4g-drfone-by-drfone-virtual-android/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
Reasons why Pokémon GPS does not Work On Tecno Spark 10 4G? | Dr.fone