Reasons why Pokémon GPS does not Work On Motorola Moto G14? | Dr.fone
Reasons why Pokémon GPS does not Work On Motorola Moto G14?
There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:
- The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
- The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.
Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices
For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.
Fixture 1: Turning on Wi-Fi
There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.
Fixture 2: Reload the game
This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.
Fixture 3: Restart the Phone
Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Motorola Moto G14 device to restart. In most cases restarting the Motorola Moto G14 device will get the issue of GPS not working Pokémon go iPhone resolved.
Part 2: The best GPS Spoofer to be used
Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.
PearlMountain Image ConverterHow to use Dr. Fone Virtual Location
The process that you need to follow is mentioned as follows.
Step 1: Install the Program
Download the exe file and install the program, to begin with, the process.
.png)
Kanto Player Professional
Step 2: Virtual Location Enablement
Connect the iPhone with the system and click on the button that states get started to enable the virtual location.
Step 3: Device Location
The center on button is there on the program. Press it and the program will detect the location on your device.
Step 4: Changing Location
For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.
Step 5: Movement to the teleport
Press the move here button to move to the teleported location that has been selected.
SwifDoo PDF Perpetual (2-PC) Free upgrade. No monthly fees ever.
Step 6: Validate the Location
The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.
Part 3: 3 Ways to fix Pokémon GPS not working on Android devices
The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.
Method 1: Turn on Location Services
Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.
Method 2: Restart the Motorola Moto G14 device
This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.
Method 3: Update the Application
This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.
DEX 3 RE is Easy-To-Use DJ Mixing Software for MAC and Windows Designed for Today’s Versatile DJ.
Mix from your own library of music, iTunes or use the Pulselocker subsciprtion service for in-app access to over 44 million songs. Use with over 85 supported DJ controllers or mix with a keyboard and mouse.
DEX 3 RE is everything you need without the clutter - the perfect 2-deck mixing software solution for mobile DJs or hard-core hobbiests.
PCDJ DEX 3 RE (DJ Software for Win & MAC - Product Activation For 3 Machines)
Conclusion
The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.
9 Mind-Blowing Tricks to Hatch Eggs in Pokemon Go Without Walking On Motorola Moto G14
“I have been playing Pokemon Go for over a year now, but I always find it hard to hatch new eggs. It needs so much walking, and I can’t do that because of my work – as I don’t get too much time to go out. I know so many people who use location spoofers to do it. Can someone tell me how to hatch eggs in Pokemon Go without walking?”
If you are also going through a similar situation with Pokemon Go, then this would be a perfect guide for you. Ideally, to hatch an egg in Pokemon Go, users are supposed to walk a lot. Don’t worry – some smart tricks can help you hatch more eggs without walking. Read on and learn how to hatch eggs without walking in Pokemon Go!
Click “Try It Free” to Download Dr.Fone and Hatch Eggs in Pokemon Go Without Walking Now!
Way 1: Use an iOS Location Spoofer
An iOS location spoofer is one of the best ways to learn Pokemon Go hatch eggs without walking. If you own an iOS device, then I would recommend using Dr.Fone - Virtual Location (iOS) , which provides excellent location spoofing solutions. With just one click, you can mock your location to anywhere else in the world. Furthermore, you can also simulate your movement between different spots.
- There is a dedicated feature to simulate our walking movement from one spot to another or between multiple spots using it.
- You can enter the number of times you wish to move to and from the specific locations on Dr.Fone – Virtual Location (iOS).
- There is also an option to select your speed – which can make you mock movements like walking, cycling, or driving.
- You can change your locations and movements as many times as you want without the need to jailbreak your device.
To learn how to hatch Pokemon Go eggs without walking using Dr.Fone – Virtual Location (iOS), the following steps can be taken.
Step 1: Connect your device and launch the app
Firstly, just connect your iPhone to the application and launch the Wondershare Dr.Fone > Virtual Location feature.
Just agree to the terms and click on the “Get Started” button to launch the interface of Virtual Location and start Pokemon Go how to hatch eggs at home.
Step 2: Walk between two stops
As the interface would be launched, you can see five different modes in the top-right corner. Just click on the third option (One-stop route) and look for any location from the search bar.
Now you can just select the number of times you wish to move and complete other settings, such as enabling the realistic and fluctuation mode. After that, click on the “Move Here” button.
Tips:
1. Realistic Mode: It enhances the realism of the simulation by fluctuating the speed during the simulation.
2. Fluctuation Mode: This feature enables you to move around within a 5-meter range after reaching your destination, instead of remaining static. This helps to make the GPS location change more realistic, making it less likely for Pokemon Go to detect the use of the virtual location.
This will just start the simulation, and you can even adjust the speed from a slider at the bottom.
Step 3: Move along multiple spots
Using Dr.Fone – Virtual Location (iOS), you can also simulate an entire route between multiple spots as well. To do this, just click on the “Multi-stop route” which is the fourth option in the top-right corner of the interface.
Now, you can mark multiple spots on the map and can also select the number of times you wish to take this route. Click on the “Start Moving” button to start Pokemon Go hatch eggs without walking.
In the end, your location would be changed as the simulation would make Pokemon Go believe that you are taking the subsequent route. You can also change your walking speed from a slider as well.
In this way, you can learn how to hatch eggs in Pokemon Go without walking at the convenience of your home!
Way 2: Use an Android Location Spoofer
This is one of the quickest ways to learn how to hatch Pokemon Go eggs without walking. If you own an Android device, then you can simply use a GPS spoofing app to manually change the location of your device. This will trick Pokemon Go into believing that you are walking instead. For iPhone users, the feature would need a jailbroken device though.
While changing your location, make sure that you do it tactfully. For instance, if an egg would need 10 kilometers of walking, then change your location gradually instead of just switching it in one go. Here’s how to hatch eggs in Pokemon Go without walking by using a GPS spoofer.
- Firstly, unlock your Motorola Moto G14 and go to its Settings > About Phone to tap the Build Number field 7 times. This will unlock the Developer Options settings on your Android.
Key features:
• Import from any devices and cams, including GoPro and drones. All formats supported. Сurrently the only free video editor that allows users to export in a new H265/HEVC codec, something essential for those working with 4K and HD.
• Everything for hassle-free basic editing: cut, crop and merge files, add titles and favorite music
• Visual effects, advanced color correction and trendy Instagram-like filters
• All multimedia processing done from one app: video editing capabilities reinforced by a video converter, a screen capture, a video capture, a disc burner and a YouTube uploader
• Non-linear editing: edit several files with simultaneously
• Easy export to social networks: special profiles for YouTube, Facebook, Vimeo, Twitter and Instagram
• High quality export – no conversion quality loss, double export speed even of HD files due to hardware acceleration
• Stabilization tool will turn shaky or jittery footage into a more stable video automatically.
• Essential toolset for professional video editing: blending modes, Mask tool, advanced multiple-color Chroma Key
- Now, go to the Play Store and install a reliable location spoofing app on your phone. Later, visit Settings > Developer Options and turn it on. Also, allow mock locations on the phone and choose the installed app from here.
- That’s it! Now you can just launch the fake GPS app and manually change your location to a few meters away to trick Pokemon Go. Do the same a few times to cover a prominent distance.
KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones. It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.
KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.
Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.
Just be sure that Pokemon Go won’t detect that you are using a GPS spoofer to hatch eggs. The regular use of an app like this might result in your account ban.
Way 3: Fix Your Motorola Moto G14 on a Drone and Play Pokemon Go
Apart from a location spoofing app, there are a handful of other ways to learn how to hatch eggs without walking in Pokemon Go. Most of the eggs in Pokemon Go would need you to walk 2, 5, or 10 kilometers. The good news is that an average drone can easily cover this distance. Firstly, get a working drone on which you can easily place your phone. It is recommended to get a lock so that your device won’t fall while it is on a drone. Once your phone is successfully attached to a drone, just use it to cover a substantial distance. Make sure that the speed is minimal so that Pokemon Go would believe that you are walking instead.
Things to Remember
- While doing so, don’t forget about the safety of your phone as it can get stolen by someone if it goes too far.
- Use a lock and make sure that your phone won’t fall from your drone.
- Enable the Find My Motorola Moto G14 service on your Motorola Moto G14 or iPhone so that you can locate your phone if it is lost.
- Move your drone slowly so that Pokemon Go would not detect that you are using a drone or playing the game while driving.
Way 4: Exchange the Friend Code of Other Pokemon Go Users
A while back, Pokemon Go enabled the option to add friends on the app and send them gifts. Presently, we can send gifts to 20 other friends from our account in a day. Therefore, if you have a lot of friends, then you can send them eggs, including the exclusive 7 km egg. There are tons of online sources and forums for people to exchange their friend codes for Pokemon Go.
- Firstly, Launch Pokemon Go on your phone and go to your profile. Adjacent to the “Me” section, tap on the “Friends” section instead.
Here, you can see a list of your friends and an option to add more friends on Pokemon Go. To add a friend, you need to enter their code which can be obtained from any dedicated forum or even Reddit.
That’s it! Once you have added a friend, go to their profile, and choose to trade or send them a gift. For instance, you can send them an exclusive egg and help them hack eggs without walking.
Pro-Tip
If you have a friend who goes for a jog or walks a lot, then you can just open Pokemon Go on their phone and let them cover the distance for you as well!
Way 5: Use Your Pokecoins to Purchase More Incubators
You might already know that Pokecoins is the official currency of Pokemon Go. Using it, you can buy all kinds of tools, incense, eggs, incubators, and even Pokemons. Though, if you wish to learn how to hack eggs in Pokemon Go without moving, then consider getting some incubators. There are all kinds of incubators available in the game that can help you hatch eggs without walking much.
Firstly, make sure that you have enough Pokecoins with you. If not, launch the app and tap on the Pokeball from its home to visit its shop.
From here, you can buy as many Pokecoins as you want. For instance, $0.99 would let you purchase 100 Pokecoins.
Great! Once you have enough Pokecoins, go to the Shop again and choose to buy eggs and incubators.
After getting enough incubators, you can go to your collection and apply more incubators to hatch eggs without walking.
Way 6: Make Use of Your Bike or Skateboard
This is one of the oldest tricks in the book to learn how to hatch eggs in Pokemon Go without walking. You can just place your phone carefully on your bike or skateboard and cover the needed distance to hatch more eggs. While you would still have to go out for this, the effort needed would be far less than walking.
Just make sure that you stay safe while riding your bike or skateboard. Don’t focus too much on catching new Pokemons. Instead, just cover the needed distance to hatch the egg. Also, ride your bike or skateboard slowly to make sure Pokemon Go won’t detect any fast movement.
Way 7: Use a Roomba while Playing Pokemon Go
If you have a Roomba or any other robotic cleaner in the house, then you can also take its assistance to hack Pokemon Go eggs. All you got to do is place your phone on the Roomba and let it move around in your house. Since the robotic cleaner would move slowly, it will make Pokemon Go believe that you are walking instead. Just be sure that your phone will stay safe and protected. I would recommend placing it in a waterproof lock to further protect it from any wear and tear.
Way 8: Create a Model Railroad to Play Pokemon Go
If you are already into model railroads, then you won’t face any issues playing Pokemon Go. It would be the replica of a big railroad with miniature trains. Simply place your phone on a miniature train and let it revolve around the railroad to cover the distance. Just keep your phone safe and regulate the speed of the train to make sure that Pokemon Go won’t detect any fast movement. You would have to drive your train for a while to cover the distance, but you don’t have to walk to do it.
Way 9: Use A Turntable to Hatch Eggs without Walking Pokemon Go
Do you have a turntable? If yes, you are lucky! You can use it that you used to listen to music to trick Pokemon Go that you’re walking and hatch the eggs. Because the turntable creates enough motion in a wide enough circle that it will trick your phone’s internal sensors into thinking you’re walking. This trick is for anyone who wants to be a quick hatch in Pokemon Go! Here are the steps:
Place your phone on the outermost edge of the turntable > Turn on the turntable > Confirm if your eggs are starting to hatch. If not, readjust your device and try again.
Tips: Tired of walking to hatch eggs? Using Dr.Fone - Virtual Location to hatch Pokémon Go eggs without taking a step. Explore the world of Pokémon from the comfort of your home. Try it now and level up your Pokémon Go adventure!
Bonus Tip: The Different Types of Pokemon Eggs in Pokemon Go
In Pokemon Go, there are several types of Pokemon Eggs that you can collect. These eggs can be obtained by visiting PokeStops or by receiving them as rewards for completing certain in-game tasks. Once an egg is collected, you must walk a certain distance (ranging from 2 to 12 kilometers) to hatch the egg and reveal the Pokemon inside. You can use the ways mentioned above to hatch eggs in Pokemon Go without walking.
The types of eggs that can be collected in Pokemon Go include:
- 2 km eggs - These eggs typically hatch common Pokemon, such as Pidgey or Caterpie.
- 5 km eggs - These eggs can hatch a range of Pokemon, including some starters like Charmander and Squirtle, as well as rarer species like Dratini.
- 7 km eggs - These eggs usually contain baby Pokemon, like Pichu or Togepi, as well as some Alolan forms.
- 10 km eggs - These eggs are the rarest and can hatch some of the strongest and most sought-after Pokémon, such as Snorlax, Lapras, and even certain legendary Pokemon like Moltres or Zapdos.
Conclusion
Now that you know how to hatch eggs in Pokemon Go without walking in 9 different ways, using a professional location spoofer(like Dr.Fone - Virtual Location ), you can easily be a Poke master for sure. Go ahead and try some of these expert tips and tricks to hatch Pokemon eggs. Just be sure that the app would not detect that you are cheating else it can ban your profile. Also, consider your safety as the first priority and even protect your phone while implementing these tips in a secure way. For more tips and tricks, you can visit the Wondershare Video Community .
How to use iSpoofer on Motorola Moto G14?
iSpoofer is a location spoofer that allows you to change your location on your device. This is useful for games like Pokemon Go, where you can catch Pokemons from different regions without leaving your home. However, iSpoofer is not available for download anymore. If you are looking for an alternative to iSpoofer, you can use Dr.Fone Virtual Location. Here’s how you can use Dr.Fone Virtual Location to spoof your location on your Motorola Moto G14.
iSpoofer is one of the most useful tools for iOS users, that’s designed to simulate a user’s GPS location. With iSpoofer, you can change your current location to anywhere in the world and access geo-restricted content without any hassle. While the tool has several real-world applications, the majority of users use iSpoofer to fake their location to catch rare Pokemon in Pokemon Go.
Since iSpoofer is an extremely reliable app, even Android users want to know if they can use it on their smartphones or not. If you’re one of them, this guide will help. In today’s article, we are going to discuss if you can download iSpoofer for Android or not and what are some of the best solutions to fake GPS location on an Android device.
So, without any further ado, let’s get started.
Part 1: Can I download the iSpoofer on Android
Unfortunately, iSpoofer isn’t available for Android. It’s an exclusive geo spoofing app that only works on iOS devices. In fact, all its features are tailored for the iOS ecosystem only. So, if you have an Android device, you won’t be able to download iSpoofer for Android at all.
However, the good news is that you don’t need iSpoofer to fake GPS location on an Android smartphone. There are dozens of Android-specific location spoofing apps that’ll help you simulate the GPS location and play Pokemon Go with a fake location. Some of these tools also come with a dedicated GPS Joystick feature, which means you’ll also be able to control your movement while sitting at one spot.
Part 2: Common ways to spoof on Android
When it comes to choosing the right location spoofing methods for Android, you’ll have to be extra cautious. Why? Because there are many fake GPS apps on Android that aren’t reliable and may damage your smartphone’s overall functionality as well.
Here are some of the most common ways to spoof location on Android devices.
- Use VMOS
VMOS is an application that lets users set up a virtual machine on their Android device. This means that you’ll be able to set up two different Android systems on the same device. What makes VMOS the right tool for geo spoofing on Android is the fact that it offers a one-click root enable feature. You can easily root your virtual Android OS without damaging the firmware of the primary OS. This way you’ll be able to install professional location spoofing tools and change your GPS location without any hassle.
EmEditor Professional (Lifetime License, non-store app)
The only downside of using VMOS is that it’s extremely hard to set up and manage. First and foremost, you’ll need different tools to successfully set up the virtual OS on your device. Secondly, VMOS is heavy software and if your smartphone doesn’t have decent configurations, it may even slow down the overall processing.
- Root Your Device
Another way to fake location on Android is to root your device. Rooting an Android device will allow you to install third-party spoofing apps that offer extensive functionality. However, when you’ll root your device, you won’t be able to claim its warranty anymore. So, in case you don’t want to void your smartphone’s warranty, ‘rooting’ may not be the right solution to fake your location in Pokemon Go.
- Use PGSharp
PGSharp is one of the best alternatives to iSpoofer for Android. It’s a tweaked version of the original Pokemon Go app that comes with a few additional features such as spoofing and GPS Joystick. The best part about using PGSharp is that it’s compatible with all Android devices. You won’t have to root your device to install and run PGSharp.
You can either choose the free or the paid version of the app. Of course, the latter comes with a few additional features, but if you only want to fake location in Pokemon Go, the free version of PGSharp will get the job done as well.
Note: Keep in mind that PGSharp isn’t available on Google Play Store and you’ll have to download it from the official PGSharp website.
Extension: safest way to spoof on iOS- Dr.Fone virtual location
So, that’s how you can fake GPS location on an Android device and collect different types of Pokemon in Pokemon Go. Even though iSPoofer isn’t available for Android, you can still use the above three methods to mock location without any effort.
It’s also worth noting that iSpoofer is permanently shut down and you can no longer install it on iOS devices as well. Even the iSpoofer website is down and if you want to fake location on your iPhone/iPad, you’ll have to look for other options. One of the best ways to change GPS location on an iOS device is to use Dr.Fone - Virtual Location (iOS). It’s a professional geo spoofing tool for iOS that comes with a wide variety of features to mock location on Motorola Moto G14s.
It has a dedicated “Teleport Mode” that’ll allow you to change your current location to anywhere in the world. You can even set a fake location using its GPS coordinates. Like iSpoofer, Dr.Fone - Virtual Location (iOS) also comes with the GPS Joystick feature. This means you’ll be able to catch different types of Pokemon without moving at all.
Here are a few key features of Dr.Fone - Virtual Location (iOS).
- Change your current location with a single click
- Use GPS coordinates to find locations
- Virtually control your GPS movement using the Joystick feature
- Customize your movement speed while walking in different directions
- Compatible with all iOS versions
Follow these steps to change your GPS location on an iDevice using Dr.Fone - Virtual Location (iOS).
Step 1 - Install the Dr.Fone toolkit on your computer and launch the software. Click “Virtual Location” and connect your iPhone to the computer using a lightning cable.
Step 2 - Once the tool recognizes your device, click “Get Started” to proceed further.
Step 3 - You’ll be prompted to a map that’ll point to your current location. Select “Teleport Mode” from the top-right corner and use the search bar to find the desired location.
Step 4 - The pointer will move to the selected location automatically. Finally, click “Move Here” to set it as your new location.
That’s how you can change GPS location on an iPhone/iPad using Dr.Fone - Virtual Location (iOS).
- Title: Reasons why Pokémon GPS does not Work On Motorola Moto G14? | Dr.fone
- Author: Lary
- Created at : 2024-07-23 00:22:08
- Updated at : 2024-07-24 00:22:08
- Link: https://android-pokemon-go.techidaily.com/reasons-why-pokemon-gps-does-not-work-on-motorola-moto-g14-drfone-by-drfone-virtual-android/
- License: This work is licensed under CC BY-NC-SA 4.0.