Reasons why Pokémon GPS does not Work On Infinix Note 30i?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Infinix Note 30i device to restart. In most cases restarting the Infinix Note 30i device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Infinix Note 30i device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

Which Pokémon can Evolve with a Moon Stone For Infinix Note 30i?

Evolution items play a significant role in evolving certain species in the Pokémon game. Moon Stone is one of these peculiar items that are worth adding to your Pokedex. However, getting Moon Stone Pokémon is a tough assignment and you have to pull your best bells and whistles. However, there are several hacks and tricks that can reduce your hunting pain. In this article, we shall take you through a complete guide on Moon Stone Pokémon and evolutions.

Part 1. Moon Stone Pokémon

What is Moon Stone Pokémon?

Moon Stone is an evolution stone introduced in generation I. This peculiar stone is used to evolve certain species of Pokémon. In terms of appearance, Moon Stone Pokémon is elliptical and black as the night sky.

The simplest way to get a Moon Stone in Pokémon Sword and Shield is to go to Lake of Outrage in the Wild area. You will see a body of water on your left and a watt trader standing near it. To cross this water body, you will have to unlock the Rotom Bike from Route 9. When you manage this, check under the eight stones and you might be lucky that one of them might yield a Moon Stone. Also, you can navigate to the Dusty Bowl in the Wild Area. Here, you will find barren stones between a grassy rock and wheat field.

Pokémon that Evolve with a Moon Stone

Moon Stone makes certain species of Pokémon evolve. To evolve a Pokémon using Moon Stone in Pokémon Sword and Shield, simply open the bag and go to the “Other Items” section. Finally, use Moon Stone in any of the following Pokémon.

1. Nidorina

Nidorina is a poison type Pokémon that was introduced in Generation I. it looks like a rabbit with blue skin and dark spots around the body. Its natural abilities are poison point, rivalry, and hustle. As of level 16, Nidorona evolved from Nidoran. With the use of Moon Stone, Nidorina can evolve into Nidoqueen.

2. Nidorino

Nidorino is a male counterpart of Nidorina. This poison-type Pokémon debuted in Generation I and looks like a rabbit. It has a red-purple color with some dark spots spread across the body. Sharp teeth protrude with large upper jaws and spikes. This Pokémon is quick to anger. Nidorino evolved from Nidoran as of level 16 and can evolve to Nidoking using the Moon Stone.

3. Clefairy

This is a fairy-type Pokémon that was introduced in Generation I. It is a small, round, and star-shaped Pokémon whose abilities include magic guard and cute charm. It is timid and rarely feature near humans. Clefairy evolves from Cleffa when it gets leveled up with high friendship. With the help of Moon Stone, Clefairy evolves into Clefable.

4. Jigglypuff

This is a normal/fairy type of Pokémon that was also introduced in Generation I. Before Generation VI, this Pokémon was entirely a normal-type Pokémon. Jigglypuff itself is an evolution of Igglybuff and can evolve into Wigglytuff with the help of Moon Stone.

5. Skitty

This is a normal type Pokémon that was introduced in Generation II. This Pokémon is pink and looks like a cat with a cute charm ability. Skitty can evolve to Delcatty using the Moon Stone.

6. Munna

Munna is a psychic-type Pokémon that was introduced in Generation V. It is a small Pokémon with a pink round body having purple flower painting on its back. With the use of Moon Stone, Munna evolves into a Musharna.

Part 2. Tricks and Hacks to Get Moon Stone Pokémon

As you have seen above, getting a Moon Stone is not an easy ride. It involves lots of trials and there is no guarantee to get it. But what tricks and hacks can you incorporate to make your hunt seamless? The following are some of the plausible tricks that you can use to easily grab a Moon Stone and add it to your Pokedex.

1. Use Dr. Fone Virtual iOS Location

It goes without question that Dr. Fone Virtual Location is the best location spoofer tool. Remember Pokémon game is location-based and if you can play around with your location then you are at an upper hand of grabbing a rare Pokémon or an evolution item like Moon Stone. Dr. Fone Virtual Location makes it seamless to teleport to any location across the globe while you are seated comfortably at home. Besides, you can simulate movements between two or more points and make GPS control more flexible with the help of a joystick.

How to Teleport with Dr. Fone Virtual Location

Step 1. After installing Dr. Fone Virtual Location, launch it, and select “Virtual Location.” Now connect your iPhone to the computer.

Step 2. Click the “Get Started” on the subsequent page to access the teleport options.

Step 3. The program will display a new page with three icons at the top-right. Click the third icon to take you to the teleport mode. Again enter the place you want to teleport to in the text field at the top-left of this same window and then hit “Go.”

Step 4. Click “Move Here” from the pop-up that follows to teleport to the location you provided.

2. Use Android Spoofing Tool- Pgsharp

Pgsharp is a fake GPS location tool for Android devices and is suitable for playing Pokémon from a fake location with no root. It allows users to teleport in real-time while they are just sited at home. It has a downloadable free version. It has a user-friendly interface, and once you have set the fake GPS location on your Infinix Note 30i, you can catch rare Pokémon and evolution items with ease.

3. Use Go-tcha Evolve

Go-tcha Evolve is an application that allows you to set animations and vibration to alert you in the case of Pokémon or pokestops. You can use its “auto-catch” feature to allow it automatically grab the Pokémon or pokestops without having to respond to alerts.

Can I use iTools gpx file to catch the rare Pokemon On Infinix Note 30i

Pokemon continues to be an after-sought mobile gaming app. The iTool gpx completes the game. This tool is dully smart, letting you catch Pokemon without much hassle. iTools is a replacement for iTunes which you can now use to manage your iDevice and computer. Its simplicity makes it a walk-in-the-park as you try to catch Pokemon. It will save your computer battery life and also save you from complex background operations.

 It will inform you when a pokestop arrives without the need to even use your phone. More so, simply connect the Infinix Note 30i device to your phone via Bluetooth technology and move along as you enjoy your game. The device will vibrate or blink, an indication that you need to get ready to catch a Pokemon. So yes, you can use iTool gpx file to catch rare Pokemon.

Part 1：What can the gpx file do?

The gpx file is mainly used in software applications to transfer information about tracks and points from one application to another. These files are saved in ‘XML’ format, which makes it easy to import and read GPS data by several programs.

How to download gpx file on iOS and Android

On iOS

First, open the route that you are interested in, then select the ‘Export gpx’ option > ‘Export’ in the lower line. Next, choose whether to forward the gpx file via a provider or to copy and save it in your data.

On Android

Open the route you are interested in and hit the ‘More’ option. Next, select the ‘Export gps’ option and the file will be downloaded to your smartphone. You can forward the route to various providers by tapping the ‘Share’ button.

Why gpx Pokemon

Many games have thronged our screens but not many matches Pokemon. Once you download gpx to iTools mobile, you get real-life benefits from this hottest virtual game. As gpx files are a list of exact locations that form a route for cycling or walking, they direct the player. A player can, therefore, see their location regarding the route via GPS for surety.

Likewise, players are assured of being on the right trail when they use navigation apps with gpx files. And whey they get off track, they can redirect themselves to the path and continue gaming.

Part 2：Where to find the iTools gpx file

You have to import gpx file before opening it. The easiest way is to upload it to the web version of Google Maps.  First, open and sign in to Google Maps then add a gpx file as a new map. Follow these steps.

1. First, open the Google Maps menu and select ‘Your places’.
2. Select ‘Maps’ > ‘Create map’.
3. Select the ‘Import’ button after a new Google Maps window opens.
4. Finally, upload your gpx file. You should see the map data in your file on Google Maps.

For you to use gpx file iTools, you first have to enable the virtual location on your device. It is from the virtual location where you can cycle and pin mode with teleport and joystick. More so, you can adjust the speed as desired. You just need to choose your favorite location and get to playing. Import, export, and save the iTools gpx to continue from your last stop point.

Follow these steps to save the iTools gpx file and get gpx files from friends

With ThinkSky, you can add gpx file to iTools and fake your gps location. This app comes with plenty of functionalities to make every fake location appear real to your friends.

• First, determine and click on the point that you wish to fake.
• Next, copy the coordinates by clicking the ‘Copy to clipboard’ button.

• Then, confirm group name and click on the ‘Save’ icon. You’ll see it located besides the search bar.

• Lastly, input the coordinates names and group name and then export your favorite location list.

Part 3：Is there any safer tool to spoof Pokemon with iTools file?

You can opt for other safer tools for route creator. Perhaps it is raining and you can’t step out. Or it is already late in the night. What do you do? Just fake it! Dr.Fone comes with advanced features to help you iSpoofer gpx routes and fake your locations in simple steps.

How to export and import gpx to save and share location with Dr.Fone

First, you need to download, install, and launch Dr. Fone – Virtual Location to your computer. Then click the ‘Virtual Location’ option and connect your iPhone to the computer. Next, hit the ‘Get Started’ button. You’ll be redirected to a new window to find the actual location on your map. Please follow these steps to export and import gpx to save and share.

Step 1. Save the path as gpx.file

Dr. Fone virtual location supports saving customized routes. Click the ‘Export’ button once it pops-up.

Step 2. Import file

Next, import the shared gpx file into the app. You can download the gpx file from other websites or you can get it from friends. To import the file, go to the main screen of the app and check under the ‘Add-to-favorites’ icon then click the ‘Import’ button. Wait as the file is imported then click the ‘Save’ button after the process is completed.

You can also add your favorite iSpoofer gpx routes. To add any spot into your favorites, check for the five-star icon and click to add the route to favorites. You should see ‘Collection successfully’ after adding your favorites. This gpx route creator makes it easy to walk along your favorite routes. Click the ‘Move’ button and reach any place with a click of a button.

The Bottom Line

Being a first timer, you may find it very complicated to fake your gps location. But Pokemon map creator makes it easy. Dr. Fone virtual location works seamlessly with your iOS device to take you virtually to any place in the world, from the comfort of your living room.

Also read: