How to use Pokemon Go Joystick on Motorola Moto G34 5G?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

vMix HD - Software based live production. vMix HD includes everything in vMix Basic HD plus 1000 inputs, Video List, 4 Overlay Channels, and 1 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.


Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

DLNow Video Downloader

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Motorola Moto G34 5G is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Motorola Moto G34 5G

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

How and Where to Find a Shiny Stone Pokémon For Motorola Moto G34 5G?

Shiny Stone Pokémon is an important evolution item in Pokémon Sword and Shield. If you are a Pokémon player, you understand how great it is to capture a Shiny Stone. However, the Shiny Stone is a rare item, and you will have to put more work to grab one. In this article, we will to explain to you everything you ought to know about Shiny Stone Pokémon, including how to get them with less effort. Let’s get started.

Part 1. Shiny Stone Pokémon

Glary Utilities PRO - Premium all-in-one utility to clean, speed up, maintain and protect your PC

What is Shiny Stone Evolution?

A Shiny Stone is an item in Pokémon Go that is used to evolve certain Pokémon. Shiny Stone was introduced in Generation IV and is no different from other evolution stones such as dusk stones, dawn stone, and ice stone, to mention but a few. The major differences could be their location as well as the type of Pokémon they help to evolve. You can identify this peculiar stone by its dazzling, shining light.

How and where to find a Shiny Stone evolution

In Pokémon Sword and Shield, the easiest way to get any evolution stone, including Shiny Stone, is by completing poke jobs. When you earn a water badge and then the gym badge, you can access the third tier poke jobs. Everything further will depend on whether your Pokémon perform great in their assigned jobs. If it performs great, you will be rewarded with an evolution stone that could be a Shiny Stone. If you want your Pokémon to do a great job, make sure you meticulously read through the summary of every given poke job. This is vital because it provides you a clue of what Pokémon you should pick.

Shiny Stone Evolution

In Pokémon Go, Shiny Stone is used to evolve certain Pokémon species. The following are some of the Pokémon that evolve using Shiny Stone. Evolving them is pretty simple. Just launch the menu and navigate to the bag. Select the “Other items” tab and use it to evolve any of the Pokémon listed below.

1. Roselia

Roselia is small, light green in color grass and poison type Pokémon. It has stats of 50 hp, 60 attacks, 65 speed, and 45 defense. This Pokémon was introduced in Generation III and had three thorns on its head and black eyes with long eyelashes. It holds a rose on the one hand and a red one on the other hand. Its aroma draws serenity, but the thorns on its head contain poison. The healthier it is, the stronger its aroma is. This Pokémon evolves from Budew through friendship level up in the day. When it is subjected to a Shiny Stone, it evolves into Roserade.

2. Minccino

This is a normal type of Pokémon that was introduced in Generation 5. It is also referred to as Chinchilla Pokémon. Its abilities include cute charm, technician, and skill link. Its stats are hp-55, attack-50, defence-40, speed-75, and total combat points-75. A Minccino evolves into a Cincino using a Shiny Stone. In Pokémon Sword and Shield, Minccino is located in rolling fields, East Lake Axewell, Route 5, and Giant’s cap.

3. Togetic

Togetic is a fairy and flying type of Pokémon that has ten hatch cycles. Its abilities include hustle, serene grace, and super luck. Togetic itself evolves from Togepi with leveled up friendship through camp play and cooking curry. It can float in midair without having to flip it wings. It appears and showers happiness to kindhearted and caring people. It, however, becomes dispirited if it encounters people who aren’t kind. Togetic is located in Stony Wilderness and from an evolving Togepi. Togetic evolves to Togekiss with the help of a Shiny Stone.

Part 2. Tricks and Hacks to Find Shiny Stone Pokémon

Finding a Shiny Stone in Pokémon Sword and Shield is challenging because it is a rare item. Nevertheless, some hacks and tricks can reduce your curve of finding a Shiny Stone, as explained below.

1. Use the iOS spoofing tool-Dr. Fone Virtual Location

Since the game of Pokémon is location-based, you can fake your GPS location by simply teleporting to an appropriate Shiny Stone location while you are seated at your home. This is achievable with the help of Dr. Fone Virtual Location . The program is powerful, simple, and easy to use. You can teleport to whatever place you want, simulate movements along a route set by two or multiple points. To teleport to the location where it is easier to grab a Shiny Stone using Dr. Fone Virtual Location, follow the steps below.

Step 1. Download and install Dr. Fone Virtual Location on your computer. Now run it and click on the “Virtual Location” tab.

Step 2. After that, connect your iOS to the PC and click the “Get Started” button.

Step 3. On the next page, click the third icon on the top-right to provide the teleport mode. Choose the location you want to teleport to within the filed at the top and press “Go.”

Step 4. Click “Move Here” on the dialog box that pops up once the program finds the location.

2. Use Android spoofing tool- Pgsharp

Pgsharp i8s an Android application that enables users to be fake their GPS location and fools location-based apps like Pokémon Go to enter a territory that is easy to grab a Shiny Stone or Pokémon. It has a joystick feature for easy and smooth movement, coordinates to move to specific locations, auto walkthrough several pokestops, and saves your last location, among others.

3. Use a Drone

Some YouTube channels teach you how to use drones to cheat in Pokémon Go. A good example of a drone is DJI PantomDrone. When this drone is integrated with some smart software, you can easily control a phone that is attached to the drone. This way, you can sit at home while visiting gyms and pokestops.

Why does the pokemon go battle league not available On Motorola Moto G34 5G

After the incredible hype of finally getting the chance to battle other players, trainers hit a wall marked – Pokémon Go battle leagues Not Available.

It’s not the first time trainers have experienced bugs in the game and a long wait during maintenance breaks, but patience wears thin as after 2 weeks into the release of the super hyped Battle League, trainers all around the world are yet to have access to it.

The root cause of this disappointing course of events was a major bug in the first season of the Battle League. Some players could simply use “charged moves” repetitively without recharging. Thankfully Niantic is coming up with a fix.

EmEditor is a fast, lightweight, yet extensible, easy-to-use text editor, code editor, CSV editor, and large file viewer for Windows. Both native 64-bit and 32-bit builds are available, and moreover, the 64-bit includes separate builds for SSE2 (128-bit), AVX-2 (256-bit), and AVX-512 (512-bit) instruction sets. New versions support AI-assisted writing.

Part 1: What are the Go battle league known issues?

Pokémon Go as a game, is constantly evolving to improve the trainer’s experience which involves finding issues and resolving them. Like all other games, the publisher always tries their best to make the user experience more enriching and fair for the users.

Season 1 of the Battle League’s had a severe bug that a handful of players exploited to rise to the leader board. After a player has lodged few fast moves, (number of fast moves required for each Pokémon to charge attack, varies) the trainer’s Pokémon can lodge a secondary yet stronger charged attack to deal more damage.

The bug in the series implied that a Pokémon – “Melmetal” is able to recharge their charge attack even while attacking with a “Charged” move, essentially making the trainer using the Pokémon invincible during a real battle.

Several trainers immediately tweeted this excruciating bug to Niantic requesting this issue to be resolved immediately, as a result Niantic had to freeze the leader board for that season.

Players when entering the Battle League are shown – Pokemon Go Battle League Not Available Right Now, and all matches that were in progress were not concluded.

Thankfully, the issue has been resolved and trainers can get back into the league without any change in the previous features.

Here’s a set of few known issues in the game currently being investigated by Niantic, which we can hope to see resolved later on in the future;

• Inconsistent Fast Attacks against Opponent Charged Attacks – Your fast attacks don’t land a direct hit when the opponent is throwing his Charged Attack.
• Fast Attacks are slower on Android – Most android users are experiencing slower fast attacks than iOS users. Niantic has addressed the issue and are awaiting more reports on the issue.
• Charged Attack Button doesn’t work when tapped - Occasionally after few uses, the Charged Attack button fails to respond when tapped resulting in slower attacks during matches.
• Go Battle wins are not counted – Some times, a Go battle win is not counted in the Go Battle League Set and remains unrecorded in the journal.
• Animation Glitch of the trainer throwing a Poke ball – A glitch occurs occasionally when the trainer avatar is seen throwing a Poke Ball repetitively.
• Disappearance of the Charged Attack and Switch Button – The button of the Charge Attack and the Switch Pokémon button would eventually disappear in-enabling the trainer to take any action during live battle.
• Next Battle tab not showing up on the Post-win Screen – After ending a match or winning a battle, the button for the ‘Next Battle’ option disappears from the Post-win screen.

Part 2: Why does the go battle not available?

It’s not new for an augmented reality game to have bugs that impede on the fun aspect of the game, but the recent development to Pokémon Go included an update trainers have been waiting for since its release in 2016.

Battle League is a brand new additional feature to the game that allows players to play PVP or one on one matches with other trainers. Ninantic introduced Battle tournaments to be played in three leagues – Great, Ultra and Master, that gives trainers the opportunity to compete and gain dominance over score board.

Pokémon Go is now exploring its roots with Pvp being a part of the original game franchise. We can hope to see the game evolve into a platform for global players to go head to head with each other.

The first season of Pokémon Go Battle League had to be temporarily frozen due to prevalence of broken code (a.k.a. – bug) that created a loophole allowing certain players and unfair advantage.

After attacking your opponent with a Charge move, the move set requires a brief time to recharge in order for the player to be able to use it again.

Few players with the assist of Melmetal (ground and steel type) could lodge constant fast attacks while also using Charge moves with no recharge time. This landed a handful these players to skyrocket to the leader board.

After this issue was tweeted to the notice of the game publisher, Ninattic temporarily paused Battle League. Trainers while accessing the live tournament event would be notified with – “Pokemon Go Battle League Not Available” by the game.

Although this doesn’t mean that trainers wouldn’t be able to play practice matches or close proximity matches. Battle League presents itself as an event in the game which gives trainers the chance to earn bonuses and stardust.

Even so, Pokémon Go continues to resolve issues as they come along and this shows us how there is so much more to look forward to. Battle Leagues, since its debut has had 4 seasons till now and trainers are all pumped for Season 5.

Here’s a list of exciting updates that will be included in the upcoming season;

• At Rank 7 you will encounter a Legendary Pokémon on the Go Battle League battle tracks as similar to the Legendary Pokémon encountered in 5star raids.
• To reach Rank 2 a trainer will need to complete a number of Battles in order to progress.
• From Rank 3 all the way to Rank 10, a higher number of battles must be won to proceed.
• Season 5 will be completed once you reach rank 7 which will earn you the Elite Charged TM rather than an Elite Fast TM.
• In Season 5 few Pokémon’s will get new updated move sets which the trainers can use to train and prepare for upcoming tournaments.

Part 3: Tips you want to level up your pokemon go?

The basics you need to learn to play Pokémon go is catching Pokémon and powering them up. Other than that there are ways you can speed power up your Pokémon to increase CP to higher levels. The overall Pokémon’s collected, evolved or powered up, and battles fought in Battle League will win you points to level up in Pokémon Go.

Although it might seem like a long and hard journey, it doesn’t need to. You can catch and power up Pokémon faster and cover longer distances with some help from WondershareDr.Fone. With smoother and easier GPS spoofing you can cover Poke stops much quicker.

Here’s some tips you can put to easy use in Levelling Up in Pokémon Go:

WinUtilities Pro

Tip #1: Use dr.fone Virtual Location

Use Wondershare Dr.Fone – Virtual Location to easily teleport to catch more poke stops at an adjustable speed and free-hand direction. The program is easy to use and a quicker way to grab more powerful Pokémon using lure.

There are several adjustments to the program that makes it fun to use. You can adjust the speed according km/hr so that the speed of the pointer would be determined as either walking, biking or driving in the game. This increases your chances to catch Pokémon at your desired pace.

Key Features:

• Mock and teleport your GPS to any desired location while connecting your iPhone to your server.
• All other location based apps would determine your location according to the coordinates set up in the program.
• You can set the speed according your choice and all other apps would track you as your pointer is teleported manually or automatically.
• You can also use a free hand joystick to move the pointer on the map according to the movement of your finger.

Tip #2

• You can set up multiple lures on several Poke stops and return to those exact coordinates to catch your lured Pokémon.

Tip #3

• In order to attain a Pokémon who once powered up to its maximum potential can give you a battle worthy breed, you will need to sickle through a couple of them in order find one worth powering up.
• You can also evolve weaker Pokémon and harvest them for candy which you can use to power up your star Pokémon.

Tip #4

• Use Lucky Egg to double your XPs earned to increase the chances of getting Pokémon which when evolved spews more XP and Candy.

ZoneAlarm Extreme Security NextGen

Conclusion

Pokémon Go continues to amaze trainers and fans of the franchise, and is becoming a most engaging and fun experience. Trainers are going to keep enjoying new and improved updates that brings a cooler jazz to the game. Even though there was a hold up in the fun Niantic has improved upon their initial flaws to give us the battle league tournaments we all love.