How to use Pokemon Go Joystick on Itel P55+?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Itel P55+ is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Itel P55+

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Epubor Ultimate for Win：Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

Why is iPogo not working On Itel P55+? Fixed

The popular iPogo app is one of the best free apps you can use to spoof on your device while playing Pokémon Go. It is equipped with an abundance of features that allows players to get way ahead in the game by spotting spawns early, catching gym raids, discovering nests and quest events, and so on. If you spot a Pokémon which is way too far from your location, you can use iPogo to fake your virtual coordinates and trick Pokémon Go to think you are nearby that area. Sounds like an amazing app to use right? But, there is a downside to it too as users of the app have repeatedly reported of iPogo not working. The app seems to overload and malfunction after a few hours of repeated usage. This issue is preventing users from harnessing the full potential of their gaming experience.

Why Users download iPogo?

iPogo is a free to use Pokémon Go++ mod which can be downloaded as an APK file for your iOS devices. It features tools that can be used by players to play the game virtually anywhere in the world while also enhancing the gameplay experience. Few of these exclusive features have been mentioned in the list below;

• The Spin and Auto-cash feature can be used to capture Pokémon and throw a spinning ball without requiring a physical device.
• With just one click you can manage your collection of stored items. It removes the cumbersome ordeal of the game to manually select and delete items when you can erase all un-required items with just one tap.
• If you are on the hunt for special shiny Pokémon, you can do so without having to go through dozens of non-shiny one’s. On activating the Auto-Runaway feature on your iPogo, you can skip through the time consuming animations of all non-shiny Pokémon.
• You can augment the game to let your avatar walk continuously at a desired pace. The speed of your avatar’s movement can be adjusted using iPogo.
• If there are unnecessary elements crowding up your screen, you can hide them temporarily.
• You keep track of Pokémon spawns, quests and raids using the feed on your iPogo.

With all these amazing benefits at hand, it seems almost unfair to not be able to make the best of it if iPogo keeps crashing or stops working. Let’s look into the probable reasons why your iPogo is not working and explore methods to solve this dilemma.

Part 1: Common problem that iPogo is not working

Pokémon Go players have made several reports of how iPogo is not functioning normally on their devices. For instance, while using the Plus mod on Pokémon Go, the Itel P55+ device screen goes completely black and unresponsive making the game inaccessible. Also, devices that run Pokémon Go with iPogo seems to be running slower than those which do not use any helper or spoofing support.

Even if your device is able to withstand the load of using iPogo, it may still be possible to face other app related performance issues like ipogo enhanced-throw not working, ipogo joystick not working and ipogo feeds not working either. All these symptoms sums up the fact that the iPogo app is faltering on your device.

Read on to understand the reasons why your device is unable to run the iPogo mod smoothly;

• One of the root causes which explains why iPogo is crashing could be because you are utilizing too much of your phone’s system resource capacity. This means you have too many tabs or other applications opened on your device that is making the resource distribution falter leading to an automatic shutdown.
• Another plausible reason could be that your iPogo application has not been properly installed. It is widely agreed upon that iPogo is a difficult app to install as it involves going through complex steps making it easier for mistakes to be made, eventually leading to a complete breakdown of the software.
• Since installing iPogo is a cumbersome process, players would often resort to using downloading hacks to get the job done faster. However, not all such hacks can be relied upon as they may end up jail breaking your device or make your version of the app even more unstable.

Some Easy Solutions for fixing the “iPogo not working” issue

It is often said that short cuts can cut you short or in this case, hacked! Disrupting the framework of your device is not price you should pay for enjoying the game at its best. Although, there are other safer and more reliable solutions to making the iPogo app run better on your iOS device. Let’s take a brief peak at some of them.

• Limiting the usage of System Resources: Let’s keep in mind that it is unwise to keep too much on your plate and rightfully so. In this case, the more applications you keep active on your shortcut bar, the lesser resources your CPU has left to allocate to the iPogo app. Therefore, close off all other unnecessary applications before launching iPogo as it is already a heavy enough application to run on its own.
• Too many Items opened: Keep a tight check on your list of inventory while playing Pokémon Go using iPogo. Remember to delete all un-required collected items as it may be taking up too much space and wasting precious system resources.
• Keep you Device Clean: Not essentially in the literal sense but yes, it is indeed important to clean up your device often. Use a cleaner app that deletes and clears all those extra cache files that becomes the primary reason of system lag on your iOS device.
• Install the Official Version: It may be tempting for anyone to install the app using shortcut hacks, but that’s all they are – just hacks! Installing iPogo seem like the long way but it is the right way on all accounts. There are three methods you can use to integrate the official iPogo app, all of which has been made more simplified.

Method 1: Use the three-step app installation method which is direct and free to use.

Method 2: If you are opting for a matrix installation, in which case you will need a PC installed with either Windows, LINUX or MacOS.

Method 3: The Signulous method is a premium mod that gives the player access to additional features.

Note: All of these installation methods have specific varied requirements which must be checked appropriately.

Part 2: A better alternative for iPogo - virtual location

If using the iPogo mod to enhance your gaming experience on Pokémon Go seem less appealing with all the added hassle then there is a better alternative for you to use. You can employ a much simpler and easier to install GPS mocking application like Wondershare’s Dr.Fone Virtual Location . It offers amazing user-friendly features like speed modulation, joystick control and map routing with none of the drawbacks that you had to previously overcome. It is a highly efficient virtual location tool that can be used to conveniently spoof your location without running the risk of detection on a GPS based game like Pokémon Go.

Primary Features of Dr. Fone

• Adjust the speed of travel with three speed modes, like walking, cycling or even driving.
• Manually move your GPS on the map freely using a virtual joystick in a 360 degree direction.
• Simulate your avatar’s movements to travel on a determined route of your choice.

Step by Step Tutorial

You can follow these easy steps to teleport to anywhere in the world with the help of drfone Virtual Location.

Step 1: Run the Program

Begin with downloading Dr.Fone – Virtual Location (iOS) on your PC. Then, install and launch it. To proceed, make sure to choose “Virtual Location” tab given on the main screen.

Step 2: Plug iPhone

Now, grab your iPhone and get it connected with the PC using the lightening cable. Once done, hit on “Get Started” to begin spoofing.

OtsAV TV Webcaster

Step 3: Check Location

You will notice a map on the screen now. As it comes, you got to click on ‘Centre On’ to accurately pin point the GPS to your location.

Step 4: Enable Teleport Mode

Now, you are required to turn on the ‘teleport mode’. To do this, simply click on the first icon on the upper right hand corner. After that, enter the location you want on the upper right field and then hit ‘Go’.

Step 5: Start Teleporting

Once you enter the location, a pop-up will appear. Here, you can see the distance of the location you have chosen. Click on ‘Move here’ in the pop up box and you are good to go.

Now, the location is changed. You can now open any location based app on your iPhone and check the location. It will show the location you have selected.

Conclusion

Pokémon Go Plus mods like iPogo involves a certain degree of care in order to have a healthy game experience. Be sure to take pre-emptive measures suggested in this article and you would notice your device running smoothly in no time.

What Pokémon Evolve with A Dawn Stone For Itel P55+?

If you are a diehard Pokémon Go player, you probably know how exciting it is when your Pokémon evolves. Evolutions mean a boost in stats and strength in raids. Plenty of Pokémon users are conversant with the traditional raiding as a way to evolve. However, you can use special items to evolve your Pokémon. One such item is the dawn stone. In this article, we are going to take you through a detailed guide on dawn stone evolutions and how to get it with ease.

Part 1. Dawn Stone Pokémon Evolutions

What is Dawn Stone in Pokémon Sword and Shield?

Like Shiny Stone, dusk stone, Sun Stone, and Moon Stone, Dawn Stone is another peculiar evolution item in Pokémon Sword and Shield. If you combine Dawn Stone with certain Pokémon, they will evolve to another level. This peculiar stone was introduced in Generation IV, and in terms of appearance, Dawn Stone sparkles like a glittering eye.

You can get dawn stone from the Digging Duo found near the Wild Area nursery. You will, however, be required to pay them 500 watts before digging random items for you. Remember, this is a trial and error thing, and you might have to spend a lot of watts before finding a dawn stone. Also, you can get any evolutionary stone, including the Dawn Stone in the Lake of Outrage. Here, you will have to first obtain a Rotom Bike on route 9 to move across the water.

/a>

Pokémon that Evolve with Dawn Stone

As aforementioned, dawn stone is an evolution item that is used to evolve certain species of Pokémon. To evolve your Pokémon using Dawn Stone in Pokémon Sword and Shield, enter the bag menu and choose the “Other Items” tab. Hover on the Dawn Stone and select the “Use this item” option. Finally, select the Pokémon to evolve. These Pokémon that can be evolved using dawn stone include:

1. Kirlia

Kirlia is a small humanoid Pokémon whose upper body and arms are white while the waist and legs are light green. This makes it appear as though it is wearing tights. Kirlia’s natural abilities include synchronization and trace. It loves dancing on sunny mornings and becomes more beautiful when they sense e positive emotions of trainers. A vast majority of Kirlia live in the cities, although some are still found in the forest. Kirlia evolved from Ralts and has two possible evolutions, namely Gardevoir and Gallade. If it reaches level 30, it evolves to Gardevoir. However, if it is male and given a dawn stone, it will evolve to Gallade.

2. Snorunt

Snorunt is an ice-type Pokémon that was introduced in Generation III. It is also referred to as the “Snow Hat Pokémon.” You can find Snorunt in seafoam café, snow canyon, or even in Mysterious Grotto. Furthermore, you can obtain it by trading or Pokémon Roulette. Snorunt can evolve into Glalie or Froslass. If it reaches level 42, Snorunt evolves to Glalie. For Snorunt to evolve into Froslass, it requires a dawn stone. However, the Snorunt must be a female to evolve to Froslass.

Home Use license is dedicated for personal, non-commercial use only.
If Action! is used for commercial gain or to further any commercial purpose,
a Commercial Use license is required. Multi-license (volume discount) is intended for single

company, user or members of the same household. Action! - screen and game recorder</a>

Part 2. Hacks and Tricks to get Dawn Stone Pokémon

It is every player’s wish to avoid the long hunt for a Dawn Stone into their Podex. This issue has given birth to some of the hacks and tricks to help players cross territory and find the intended evolution item or Pokémon. Some of these tricks include:

1. Use iOS spoofing tool- Dr. Fone Virtual Location

Dr. Fone Virtual Location is an amazing iOS spoofer tool that allows users to fake their actual location. This makes it a good tool for location-based games like Pokémon Go. With Dr. Fone Virtual Location, you can teleport to whichever place across the globe by a click of a button. If you want to simulate movements to confuse the game app, you can simulate two or multiple points. Furthermore, you can leverage the joystick to improve the flexibility of GPS control. To teleport to any place in the world with Dr. Fone Virtual Location’s help, follow the steps below.

Step 1. Download Dr. Fone Virtual Location and install it on your computer. Once installed, launch it and then select the “Virtual Location” tab on the primary window. Also, connect your iOS device to the computer.

NeoDownloader - Fast and fully automatic image/video/music downloader.

Step 2. On the next page, click the “Get Started” button to proceed.

Step 3. You should see three icons on the top-right of the subsequent page. Click the third icon to switch to the teleport mode. At the top-left, enter the location of the place you want to teleport to and click “Go.”

Step 4. When the program has found the location, a dialog box will appear in the background. Click “Move Here” to teleport to this location.

2. Use Pokémon Gotcha

Pokémon Go-tcha makes hunting Pokémon and evolution items much easier. With this tool, you can go for a hunt without looking at your smartphone. When you run Go-tcha Evolve on the Pokémon Go application, you can set color animations and vibrations to alert you about Pokémon and pokestops that are in range. Moreover, you can use the auto-catch feature so that you don’t have to respond to alerts. You can also check on time, your stats, and leverage the new pedometer feature to count your steps. This program comes with various exciting colors for you to choose from and a bunch of other great features.

3. Use iTools

iTools location spoofer is another good GPS mocking tool that is suitable for Pokémon Go games. By faking the GPS location, you can easily access territories where rare Pokémon or evolution items are available while seated at home or in the office. This program supports iOS 12 devices or earlier versions. However, there are scores of people who have complained about several crashes. Nevertheless, you can try it if you have got some penny to spare.