4 solution to get rid of pokemon fail to detect location On Tecno Spark 10C

Pokémon go failed to detect location is an error that is frequently faced by the players and there are several reasons for it. From device to server-based all the reasons amount to the error and therefore the right solution must be applied to get the work done with ease and perfection. The location-based attribute of the game is something that has been one of the best features. It is the sole reason for which the game is not only popular but also one of the most downloaded games of all time. It is therefore important to overcome fail to detect location error in this game.

Part 1: Why does Pokémon fail to detect location?

The two main and frequent errors that are related to the Pokémon are error 11 and error 12. These not only frustrate the users but also hamper the game experience. Failed to detect location Pokémon go is the result. This part of the article will make sure that you get all the information that is needed to overcome the issue. The GPS joystick failed to detect location error will also be overcome and you will also be able to guide others.

Causes of Error 11

1. If the game failed to detect location Pokémon go fake GPS then the most common reason is the fact that the GPS has been disabled. The internet and GPS are the two important aspects of this game. If anyone is not available then it is a must that the game will not work at all.
2. Once the game has been installed it requires certain permissions that should be granted for proper working. All the permissions must be accepted for the game to work fine. If the GPS access has not been granted then it should be so that the GPS joystick Pokémon go failed to detect location error is resolved and you can enjoy the game.
3. To install some applications and to enhance the features of the phone it is at times rooted in the case of android or jailbroken in the case of iPhone. In both cases, you will get the Pokémon to go failed to detect location fake GPS error. It is therefore important that the issue is resolved by getting the Tecno Spark 10C device back to its original shape. It can be done by unrooting the Tecno Spark 10C devices so that the issue is resolved.

Causes of Error 12

1. The Mock location on the Tecno Spark 10C device is enabled can lead to failed to detect location GPS joystick or error 12 on the Tecno Spark 10C device. It is therefore advised to make sure that the location in question is disabled to get the gaming experience back on track.
2. The other and the most common reason for the error 12 is the fact that the GPS signals are not received by the Tecno Spark 10C device. It also leads to Pokémon failed to detect location error and will make sure that you get all the enjoyment for which the game has been downloaded.

Part 2: 3 solutions to fix Pokémon fails to detect the location

Solution 1: Turn on GPS

This is the most common method that can be applied to make sure that the game works perfectly.

i. Drag the notification panel down on your device.

ii. Click on the location to turn it ON.

Solution 2: Setting Permissions for the application

If the right permissions are not given to the application then it can also lead to the fake GPS failed to detect location. To make sure that this is overcome you need to follow the steps as under.

i. Go to Settings > Applications > Apps to access the permissions for the application.

ii. Go to Pokémon Go > Permissions > Turn on location to get the issue resolved.

Solution 3: Clear Cache

i. Go to the Settings of your device

ii. Click on the app’s icon on the next screen

iii. Click on the storage option.

iv. Clear data and cache and restart the Tecno Spark 10C device to get the issue fixed.

Part 3: Dr.Fone Virtual location change your location in one click

To fix the fake GPS Pokémon go failed to detect location Dr. Fone’s virtual location is the best and the state of the art program that can be used. It is not only the best but also allows the users to overcome the issues that are presented by the other similar programs. With this program, it is easy to make sure that the overall game performance improves in terms of location detection. You can teleport with ease using this program. With an intuitive interface and a professional team backing the program, you get the ultimate results. Not only Pokémon but all the location-based and AR games this program is a boon.

How to use Dr. Fone Virtual Location

Step 1: Program Installation

First of all download and install the program to get started.

Step 2: Enable Virtual Location

Click the get started icon once the iPhone has been connected to the system and the virtual location has been enabled.

Step 3: Locate the Tecno Spark 10C device

Click the center on a button to make sure that your location is detected by the program.

Step 4: Change Location

The third icon on the upper right corner is to be pressed to teleport. In the bar type the name of the location you want to teleport to.

Step 5: Move to a teleported location

Click on move here to get to the location that has been selected.

Step 6: Validation

Your iPhone will show the same location as on the program and this finishes the process.

Conclusion

Dr. Fone’s virtual location is the best and the most advanced program that will make sure that you get the best results. It will not only enhance your gaming experience but will also remove the Pokémon go GPS joystick that failed to detect location error with perfection. It is the best program that is easy to use and there are guides online that further foster the process. With this program, it is easy to get a step ahead for all AR and location-based games and to enjoy to your fullest.

How to use Pokemon Go Joystick on Tecno Spark 10C?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Tecno Spark 10C is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Tecno Spark 10C

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

Unova Stone Pokémon Go Evolution List and How Catch Them For Tecno Spark 10C

Pokémon Go players anticipate new evolutions with much excitement. This is because evolutions take the gaming experience to another level. After being kept waiting, Pokémon Go players finally have a reason to put a smile on their faces. Pokémon Go has unleashed an important item for the evolution of generation 5 Pokémon in the Unova region. This item is called Unova Stone. In this article, we explain to you through every aspect and concept that pertains to Unova stone Pokémon go evolution.

Part 1. Unova Stone Evolution

What is Unova Stone

Unova Stone is one of the latest evolutions added in Unova’s region to the game of Pokémon. It is a black and white item that is used to evolve certain Pokémon, specifically from Unova. This is akin Sinnoh Stone that was used to evolve Pokémon from Sinnoh Regio. However, Unova Stone is only capable of evolving Generation 5 Pokémon from the Unova region. It means you cannot use Unova Stones to evolve Pokémon from previous generations. Even though there are plenty of emerging Pokémon and Shiny Pokémon worth collecting, there are scores of trainers who understand the real value of adding Unova Stones to their inventory. By accumulating them, they can seamlessly achieve evolution with some Pokémon in the Unova region.

How Can you Obtain Unova Stone in Pokémon Go?

Obtaining Unova Stone in Pokémon is now possible through research breakthroughs. But what exactly is research breakthroughs? Research breakthroughs are when a trainer completes seven research tasks with every research panning a day each. Here, the trainer only needs to complete the seven research pieces but not for seven straight days. This means it is possible to skip a day then resume your research until you complete seven of them without fail.

Which Pokémon Require Unova Stone to Evolve in Pokémon Go?

As aforementioned, Unova Stone is used to evolve Pokémon only in the Unova region. Also, these Pokémon are of Generation 5. Some of these pre-evolution state Pokémon include:

1. Pansage

Pansage is a grass-type Pokémon originally found in the Unova region, Generation 5. It has a Max CP of 956, 104 attack, 94 defences, and 137 stamina in Pokemon Go. Also, this Pokémon is vulnerable to threats like a bug, fire, flying, ice, and poison moves. It can evolve into Simisage using an Unova Stone and 100 candy.

2. Lampent

Lampent is a Generation 5 Pokémon found in the Unova region. It is a ghost and fire-type Pokémon whose Pokémon Go mx CP is 1708, 169 attack, 115 defense, and 155 staina. This Pokémon is vulnerable to dark, ghost, ground, rock, and water kind of moves. This Pokémon evolves into Chandelure using a Unova Stone and 100 Candy.

3. Eelektrik

This is an electric type of Pokémon with Max CP of 1715, 156 attack, 130 defense, and 163 stamina in Pokémon Go. It is boosted by rainwater but is vulnerable to ground moves. This Pokémon requires an Unova Stone plus 100 candy to evolve to Eelektross.

4. Minccino

Minccino Pokémon is a Generation 5 normal type Pokémon initially found in Unova Region. It is boosted by partly cloudy weather but is vulnerable to fighting type moves. It requires a Unova Stone and 50 candy to evolve to Cinccino.

5. Munna

This is a psychic type Pokémon vulnerable to bug, dark, and ghost moves. This generation 5 Pokémon found in Unova region is boosted by windy weather. For Munna to evolve into Musharna, it requires a Unova Stone and 50 candy.

6. Pansear

Pansear is a fire-type Generation 5 Pokémon found in the Unova region.it is vulnerable to moves like ground, rock, and water. This Pokémon will evolve to Simisear using an Unova Stone and 50 candy.

7. Panpour

Panpour is a water type Pokémon also initially found in the Unova region. This Pokémon is vulnerable to electric and grass moves. It requires a Unova stone and 50 candy to evolve to Simipour.

Part 2. Tricks to getting Pokémon Unova Stone

Unova Stone is a great evolution asset in Pokémon Go generation 5. You are already aware that you need to make a filed research breakthrough to obtain Unova Stones. But what are some of the hacks and tricks that can make you easily claim the Unova Stones?

1. Use iOS Spoofing tool-Dr. Fone Virtual Location

Dr. Fone Virtual Location is a powerful iOS spoofing tool that can be used to fake your GPS location and hit field research weekly breakthrough with ease. You can teleport to whatever place you want or simulate movements between two places. These places can be real or simply any paths you draw. This makes it ideal for location-based games such as Pokémon Go. If you want to fake your location and trick Pokémon Go to get a research breakthrough with ease using Dr. Fone Virtual Location, then follow the steps below.

Step 1. Download, install and launch Dr. Fone Virtual Location on your computer. Once launched, click on the “Virtual Location” tab.

Step 2. Next, link your iPhone with computer and then click the “Get Started” button.

Step 3. On the next window, select the third icon (teleport) at the top-right to enter the teleport mode. Now type the name of the place you want to teleport to and press “Go.”

Step 4. Finally, click “Move Here” on the dialog box that appears to move to the place you chose.

2. Use VPN

You can leverage VPN to change your location and fool Pokémon to complete the research breakthrough. However, you should be cautious with the VPN provider. The good thing about VPN is that they are secure and do not require jailbreaking. The downside is that good VPNs are expensive and are restricted to server locations.

3. iSpoofer

This is a desktop-based spoofing tool which can help you fake your location. It does not require jailbreaking and thus can easily spoof for Pokémon Go. The downside is that it requires Windows PC and that the premium version is expensive.