Here are Some Pro Tips for Pokemon Go PvP Battles On Xiaomi Redmi Note 13 Pro 5G

“How to plan the PvP Pokemon matches and are there some strategies that I need to implement in the PoGo PvP battles?”

Ever since the Pokemon Go PvP mode has been introduced by Nintendo, there has been a lot of confusion among the players. Ideally, you can partake in a Pokemon PvP battle locally or remotely. It is a 3 vs. 3 battle in which you have to select your best Pokemons to fight with other trainers. To help you become a PvP Poke master, I have come up with this detailed guide that will certainly come in handy.

Part 1: Pro Strategies to Follow in PvP Pokemon Go Battles

If you want to be good at the Pokemon Go PvP battles, then you must understand how the game works. Once you are ready, I would recommend some of these Pokemon PvP strategies that are followed by pro players.

Tip 1: Start from the low leagues

As you know, there are three different leagues to participate in Pokemon Go PvP battles. If you are a beginner or don’t have too many Pokemons, then you should start from the lower categories and gradually climb your way up. You can find these three categories in the PoGo PVP mode:

• Great League: Max 1500 CP (per Pokemon)
• Ultra League: Max 2500 CP (per Pokemon)
• Master League: No CP limit

The Master Leagues is mostly reserved for pro players since there is no CP limit for Pokemons. The Great League is the best category to learn and try different Pokemon combinations.

Tip 2: Master all the Battle Moves

Ideally, there are four different moves in any PvP Poke battle that you must master. The more battles you partake in, the better you would become.

• Fast attacks: These are the basic attacks that are done more frequently than others.
• Charge attack: Once your Pokemon has enough energy, you can do a charge attack that would do more damage.
• Shield: This would shield your Pokemon from the enemy attacks. In the starting, you would only get 2 shields per battle.
• Swapping: Since you get 3 Pokemons, don’t forget to swap them during the battle. You can only swap Pokemons once in every 60 seconds.

Tip 3: Check your Opponent’s Pokemons

This has to be the most important thing that you should check before you start any Pokemon Go PvP battle. Right before starting the battle, you can check a list of the prospective opponents in your league. You can have a glimpse of their main Pokemons and pick your Pokemons accordingly so that you can counter their picks.

Tip 4: Know the current Meta

In nutshell, Meta Pokemons are the ones that are considered superior to other picks since they are more powerful. You might already know that some Pokemons are just stronger than others. Since Nintendo keeps balancing Pokemons with constant nerfs and buffs, you should do some research in advance.

There are several sources like the Silph Arena, PvPoke, and Pokebattler that you can check to know the current meta Pokemons.

Tip 5: Shield Baiting Strategy

This is one of the most effective Pokemon Go PvP strategies that you must try. You might already know that there are two kinds of charged attacks a Pokemon can do (mild and strong). During the battle, you need to first poke your enemy and have enough energy for both moves.

Now, instead of going with your ultimate attack, only perform the mild one. Your opponent might assume that you are going for an ultimate and would use their shield instead. Once their shield is used, you can go for a stronger attack to win.

Tip 6: Learn to Counter Fast Moves

To make the most of your shield and energy levels, you should learn how to counter moves. The first way to do this is by picking your Pokemons wisely. Your Pokemon would automatically get less damage if it can counter your opponent’s Pokemon.

During any PvP Poke battle, keep a count of your opponent’s moves to calculate when they would do a charged attack. Since you would only get 2 shields at the starting of the battle, make sure that you only use them at the time of need.

Tip 7: Sacrifice Swap

This might sound surprising, but sometimes we have to sacrifice a Pokemon in a fight to win the battle. For instance, you can consider sacrificing a Pokemon that is at low energy and won’t be of much help later.

In this way, you can swap it in the battle and let it take all the charge attack of your opponent. Once the Pokemon is sacrificed and has drained the opponent’s Pokemon, you can place another Pokemon to claim the victory.

Part 2: What Changes should be implemented in Pokemon Go PvP?

Even after the much-anticipated release of PoGo PvP, a lot of players are not satisfied with it. If Nintendo wants to improve Pokemon PvP and make their players happy, then the following changes should be made.

• The PvP Poke battles are based on the CP level of Pokemons instead of their IV levels, which is something most of the players dislike.
• Nintendo should focus on making the battles smoother as a lot of players encounter unwanted bugs and glitches.
• Apart from that, players also complain about unfair matchmaking in which pro players are often matched against beginners.
• The overall pool of Pokemons is not balanced – if a player has meta Pokemons then they can easily win the game.
• The PoGo PvP battles are more centric on the picks and less on the actual battle. Players would like more strategic moves and in-battle options to help them fight.

Part 3: How to Select the Best Pokemons for PvP Battles?

During any Pokemon PvP battle, the type of Pokemons you pick can either make or break the results. Firstly, consider the following things in mind before you start any PvP Poke battle.

• Team composition

Try to come up with a balanced team that would have both defensive and attacking Pokemons. Also, you should include Pokemons of different types in your team.

• Focus on attacks

Presently, some attacks like thunderbolt are considered extremely strong in PoGo PvP battles. You should get to know about all the major attacks of your Pokemons to pick the best ones.

• Consider Pokemon Stats

Most importantly, you should be aware of the defense, attack, IV, CP, and all the vital stats of your Pokemons to pick the best ones in the league of your choice. Besides that, you should also do some research about the Meta tier in Pokemon PvP to know the best picks of the present time.

Most of the experts consider the following points while picking any Pokemon in PvP battles.

• Lead

Firstly, focus on getting a Pokemon that can help you maintain a lead in the battle right from the start. You can consider getting Altaria, Deoxys, or Mantine as they are the strongest attackers.

• Attacker

If you want to fight more aggressively in the Pokemon PvP battle, then consider getting some attackers like Bastiodon, Medicham, and Whiscash.

• Defender

While making your Pokemon PvP team, make sure that you have at least one strong defender like Froslass, Zweilous, or Swampert.

• Closer

In the end, make sure that you have a perfect Pokemon that can end the battle and secure a win. Pokemons like Azymarill, Umbreon, and Skarmory are some of the best closers.

Part 4: Secrets about the new Mechanics in PvP Pokemon Go Battles

Lastly, if you want to level up in PvP Poke battles, then you should get to know about these three important mechanisms.

• Turns

Make sure that you keep an eye on the DTP and EPT values as they would indicate how much damage and energy is left. In the new mechanism, everything is about taking turns in 0.5 seconds. This will help you not only counter but also implement your moves before your opponent.

• Energy

You might already know that every Pokemon starts with 100-value energy. While switching Pokemons, make sure that you remember their energy value as that would be retained later on. The energy value of every Pokemon will also help you make a charged move in time.

• Switching

Switching is another strategic account in the new mechanism of Pokemon PvP battles in which we enter new Pokemons to the battle. Please note that the switching action has a 60-second cooldown window and you would only get 12 seconds to choose your next Pokemon.

There you go! I’m sure that after reading this post, you would be able to know every important thing about PvP Poke battles. From the meta Pokemons for PvP battles to essential mechanisms, I have listed it all in this guide. Now, it is time for you to implement these tips and become a Pokemon Go PvP champion in no time!

The Ultimate Guide to Get the Rare Candy on Pokemon Go Fire Red On Xiaomi Redmi Note 13 Pro 5G

In all Pokemon Go versions, a Rare Candy will automatically uplift you to the next level. These cadies are powerful and come with a lot of extra rewards. That said they are also very difficult to find, especially in Pokemon Fire Red. This article will show you some of the ways in which you can find Rare Cady, and level up quickly to improve your status in the game.

Part 1: What is the rare candy in Pokémon Go Fire Red?

All Pokemon Go game variations have Rare Candy, and they are mainly used to upgrade the level of any Pokemon by 1. If you were at level 9, you automatically go up to level 10, etc. This will save you from having to engage in battles to raise your level. You may also earn the level attacks that you would have earned at that level, even without having to fight.

There are a limited number of Rare Candy in Pokemon Go Fire Red. However, you can get unlimited Rare Candies by using Pokemon Go Fire Red Rare Candy cheat codes through GameShark or Action Replay. You may also get them through cloning your existing Rare Cady.

When you use a Rare Candy, you get enough Exp. Points to move to the next level. This means that it is best to use them for getting to the next level, especially when it becomes too challenging. Although you get to the next level, you will not earn any Effort Value Points, which will make your Pokemon weaker than it would have been if you had leveled up through training.

Part 2: How to get rare candy in Pokemon Go Fire Red?

There are three main ways in which you can get Rare Candy in Pokemon Go Fire Red. The first one is using a location spoofer to catch rare candy without moving. The second one involves going to areas where you can find the Rare Cady and the last one involves using a Fire Red Rare Candy Code.

Getting Pokémon GO Fire Red Rare Candy without Walking/Moving

Searching for the simplest way to collect rare candies in Pokémon GO? If your answer is affirmative, there is good news: We have the perfect tool for you. Wondershare Dr.Fone - Virtual Location allows you to play Pokémon GO from the comfort of your house. You no longer need to walk miles to visit gyms and PokéStops or hatch eggs.

All of this can be done without even moving from your bed. Dr.Fone – Virtual Location facilitates you in mimicking realistic movements of the map to play Pokémon GO. To make this process easier for you, there is also a joystick included in the tool to help you simulate movement. Furthermore, it comes with pre-built functions such as a one-stop route and muti-stop route to further help you.

Notable Characteristics of Dr.Fone - Virtual Location

1. Not only can you follow the routes on the map, but you can also import and export route files.
2. There is no need to jailbreak your iOS device to spoof location when using Dr.Fone - Virtual Location.
3. When spoofing your location on iOS devices, Dr.Fone supports up to 5 devices from a single Mac or PC.

Instructions for Getting Pokémon GO Fire Red Rare Candy Without Walking/Moving

Dr.Fone - Virtual Location offers a simple and easy-to-understand way to spoof your location when playing Pokémon GO. The following are the steps you need to follow for location spoofing:

Step 1: Connect to Dr.Fone - Virtual Location and Set Target Location

With Dr.Fone - Virtual Location launched on your computer, connect your smartphone. Once on the map screen, click the “Teleport Mode” icon, the first one, from the toolbar near the top-right corner. Now tap the search bar on the top left corner, enter the targeted location, and press “Enter.”

Step 2: Teleport to Targeted Location

The cursor on the map screen will move to the location you have entered on the map. If you want to move there when spoofing your location, click “Move Here.” It will change the location on the map screen and on your device to the location you entered. You can confirm it by accessing your smartphone and opening a map application.

Step 3: Simulate Movement and Configure Route

To simulate movement when spoofing your location, you can select either “One-Stop Route” or “Multi-Stop Route.” Both are the third and fourth options, respectively, on the toolbar near the top right corner. Now, choose the stop points, type of trip, walking speed, and other parameters. Once you are done, tap “Move Here” or “Start Moving” to initiate the movement.

Getting Pokemon Go Fire Red Rare Candy Normally

You would have to visit certain locations in order to get Pokemon Go Rare Candy in the normal way. The locations which have been found to give most Rare Candy are:

• Take a look behind the house in Cerulean City
• Go to Mount Moon and get one
• Check at the Rocket Game corner
• Take a journey to the Ghost Tower
• When you get to the Safari Zone Warden’s House, check behind the boulder.
• You may also use Meowth or any other Pokemon that has Pickup abilities and try your luck.

Getting Pokémon Go Fire Red Rare Candy with cheat codes

The best way to go about this is to use a Pokemon Go Fire Red emulator on your computer and then use the fire red chat code shown below and follow the simple instructions.

Look for the Pokemon Go Fire Red codes posted on various user sites.

Use GameShark or My Boy game emulator to install the codes and then get the Rare Candy that you need.

The cheat code for Pokemon Go Fire Red Candy is:

Part 3: How do you get unlimited rare candies in Pokemon Red?

Sometimes, you don’t want to keep adding Pokémon Go Fire Red Rare candy codes one at a time. You simply want to Master Code that will help you get the Rare Candy whenever you need them.

This is how you go about getting unlimited Rare Candy on Pokemon Go Fire Red.

82025840 0044

It can be used to get a single Rare Candy or to unlimited Rare Candy as shown below:

Pokemon Go Cheat Code for Unlimited Rare Candies

82025840 0044

How to use the code:

Step 1 – Turn off or delete any other code that you may have stored.

Step 2 – go to a Pokéstop and then save your game.

Step 3 – create a new cheat as follows;

• Code Name: Rare Candy
• Code Type: CodeBreaker
• Code: 820258400044

Wait for it to be activated and then save it.

Step 4 – Enter the Pokéstop and deactivate the cheat code.

Step 5 – Go to your computer and type in “PC > Item Storage”.

Step 6 – Withdraw a SINGLE Rare Candy

Step 7 – check if you have double Rare Candy entries in your storage. If they are not duplicated, then the cheat has worked as it should. If they are duplicated, then you have to close the game and redo all the steps above.

Step 8 – Now exit and then go back to your Item Storage, where you can withdraw as many Pokemon Go Fire Red Rare Candies as you would want. Simply pick a number between 001 and 999, but never use the down arrow.

In conclusion

Getting Rare Candy in Pokemon Go Fire Red is a difficult task. These cadies are not easy to find and they may not be in a location that you can access easily. The article shows you the locations at which you can collect Pokemon Go Fire Red Candy using the normal gameplay. You may also use Pokemon Go GameShark cheat codes and get unlimited Rare Candy to use whenever you need them.

9 Mind-Blowing Tricks to Hatch Eggs in Pokemon Go Without Walking On Xiaomi Redmi Note 13 Pro 5G

“I have been playing Pokemon Go for over a year now, but I always find it hard to hatch new eggs. It needs so much walking, and I can’t do that because of my work – as I don’t get too much time to go out. I know so many people who use location spoofers to do it. Can someone tell me how to hatch eggs in Pokemon Go without walking?”

If you are also going through a similar situation with Pokemon Go, then this would be a perfect guide for you. Ideally, to hatch an egg in Pokemon Go, users are supposed to walk a lot. Don’t worry – some smart tricks can help you hatch more eggs without walking. Read on and learn how to hatch eggs without walking in Pokemon Go!

 Click “Try It Free” to Download Dr.Fone and Hatch Eggs in Pokemon Go Without Walking Now!

Way 1: Use an iOS Location Spoofer

An iOS location spoofer is one of the best ways to learn Pokemon Go hatch eggs without walking. If you own an iOS device, then I would recommend using Dr.Fone - Virtual Location (iOS) , which provides excellent location spoofing solutions. With just one click, you can mock your location to anywhere else in the world. Furthermore, you can also simulate your movement between different spots.

• There is a dedicated feature to simulate our walking movement from one spot to another or between multiple spots using it.
• You can enter the number of times you wish to move to and from the specific locations on Dr.Fone – Virtual Location (iOS).
• There is also an option to select your speed – which can make you mock movements like walking, cycling, or driving.
• You can change your locations and movements as many times as you want without the need to jailbreak your device.

To learn how to hatch Pokemon Go eggs without walking using Dr.Fone – Virtual Location (iOS), the following steps can be taken.

Step 1: Connect your device and launch the app

Firstly, just connect your iPhone to the application and launch the Wondershare Dr.Fone > Virtual Location feature.

Just agree to the terms and click on the “Get Started” button to launch the interface of Virtual Location and start Pokemon Go how to hatch eggs at home.

Step 2: Walk between two stops

As the interface would be launched, you can see five different modes in the top-right corner. Just click on the third option (One-stop route) and look for any location from the search bar.

Now you can just select the number of times you wish to move and complete other settings, such as enabling the realistic and fluctuation mode. After that, click on the “Move Here” button.

Tips:
1. Realistic Mode: It enhances the realism of the simulation by fluctuating the speed during the simulation.
2. Fluctuation Mode: This feature enables you to move around within a 5-meter range after reaching your destination, instead of remaining static. This helps to make the GPS location change more realistic, making it less likely for Pokemon Go to detect the use of the virtual location.

This will just start the simulation, and you can even adjust the speed from a slider at the bottom.

Step 3: Move along multiple spots

Using Dr.Fone – Virtual Location (iOS), you can also simulate an entire route between multiple spots as well. To do this, just click on the “Multi-stop route” which is the fourth option in the top-right corner of the interface.

Now, you can mark multiple spots on the map and can also select the number of times you wish to take this route. Click on the “Start Moving” button to start Pokemon Go hatch eggs without walking.

In the end, your location would be changed as the simulation would make Pokemon Go believe that you are taking the subsequent route. You can also change your walking speed from a slider as well.

In this way, you can learn how to hatch eggs in Pokemon Go without walking at the convenience of your home!

Way 2: Use an Android Location Spoofer

This is one of the quickest ways to learn how to hatch Pokemon Go eggs without walking. If you own an Android device, then you can simply use a GPS spoofing app to manually change the location of your device. This will trick Pokemon Go into believing that you are walking instead. For iPhone users, the feature would need a jailbroken device though.

While changing your location, make sure that you do it tactfully. For instance, if an egg would need 10 kilometers of walking, then change your location gradually instead of just switching it in one go. Here’s how to hatch eggs in Pokemon Go without walking by using a GPS spoofer.

1. Firstly, unlock your Xiaomi Redmi Note 13 Pro 5G and go to its Settings > About Phone to tap the Build Number field 7 times. This will unlock the Developer Options settings on your Android.

   

2. Now, go to the Play Store and install a reliable location spoofing app on your phone. Later, visit Settings > Developer Options and turn it on. Also, allow mock locations on the phone and choose the installed app from here.

   

3. That’s it! Now you can just launch the fake GPS app and manually change your location to a few meters away to trick Pokemon Go. Do the same a few times to cover a prominent distance.

   

Just be sure that Pokemon Go won’t detect that you are using a GPS spoofer to hatch eggs. The regular use of an app like this might result in your account ban.

Way 3: Fix Your Xiaomi Redmi Note 13 Pro 5G on a Drone and Play Pokemon Go

Apart from a location spoofing app, there are a handful of other ways to learn how to hatch eggs without walking in Pokemon Go. Most of the eggs in Pokemon Go would need you to walk 2, 5, or 10 kilometers. The good news is that an average drone can easily cover this distance. Firstly, get a working drone on which you can easily place your phone. It is recommended to get a lock so that your device won’t fall while it is on a drone. Once your phone is successfully attached to a drone, just use it to cover a substantial distance. Make sure that the speed is minimal so that Pokemon Go would believe that you are walking instead.

Things to Remember

• While doing so, don’t forget about the safety of your phone as it can get stolen by someone if it goes too far.
• Use a lock and make sure that your phone won’t fall from your drone.
• Enable the Find My Xiaomi Redmi Note 13 Pro 5G service on your Xiaomi Redmi Note 13 Pro 5G or iPhone so that you can locate your phone if it is lost.
• Move your drone slowly so that Pokemon Go would not detect that you are using a drone or playing the game while driving.

Way 4: Exchange the Friend Code of Other Pokemon Go Users

A while back, Pokemon Go enabled the option to add friends on the app and send them gifts. Presently, we can send gifts to 20 other friends from our account in a day. Therefore, if you have a lot of friends, then you can send them eggs, including the exclusive 7 km egg. There are tons of online sources and forums for people to exchange their friend codes for Pokemon Go.

1. Firstly, Launch Pokemon Go on your phone and go to your profile. Adjacent to the “Me” section, tap on the “Friends” section instead.

   

2. Here, you can see a list of your friends and an option to add more friends on Pokemon Go. To add a friend, you need to enter their code which can be obtained from any dedicated forum or even Reddit.

3. That’s it! Once you have added a friend, go to their profile, and choose to trade or send them a gift. For instance, you can send them an exclusive egg and help them hack eggs without walking.

   

Pro-Tip

If you have a friend who goes for a jog or walks a lot, then you can just open Pokemon Go on their phone and let them cover the distance for you as well!

Way 5: Use Your Pokecoins to Purchase More Incubators

You might already know that Pokecoins is the official currency of Pokemon Go. Using it, you can buy all kinds of tools, incense, eggs, incubators, and even Pokemons. Though, if you wish to learn how to hack eggs in Pokemon Go without moving, then consider getting some incubators. There are all kinds of incubators available in the game that can help you hatch eggs without walking much.

1. Firstly, make sure that you have enough Pokecoins with you. If not, launch the app and tap on the Pokeball from its home to visit its shop.

2. From here, you can buy as many Pokecoins as you want. For instance, $0.99 would let you purchase 100 Pokecoins.

   

3. Great! Once you have enough Pokecoins, go to the Shop again and choose to buy eggs and incubators.

4. After getting enough incubators, you can go to your collection and apply more incubators to hatch eggs without walking.

   

Way 6: Make Use of Your Bike or Skateboard

This is one of the oldest tricks in the book to learn how to hatch eggs in Pokemon Go without walking. You can just place your phone carefully on your bike or skateboard and cover the needed distance to hatch more eggs. While you would still have to go out for this, the effort needed would be far less than walking.

Just make sure that you stay safe while riding your bike or skateboard. Don’t focus too much on catching new Pokemons. Instead, just cover the needed distance to hatch the egg. Also, ride your bike or skateboard slowly to make sure Pokemon Go won’t detect any fast movement.

Way 7: Use a Roomba while Playing Pokemon Go

If you have a Roomba or any other robotic cleaner in the house, then you can also take its assistance to hack Pokemon Go eggs. All you got to do is place your phone on the Roomba and let it move around in your house. Since the robotic cleaner would move slowly, it will make Pokemon Go believe that you are walking instead. Just be sure that your phone will stay safe and protected. I would recommend placing it in a waterproof lock to further protect it from any wear and tear.

Way 8: Create a Model Railroad to Play Pokemon Go

If you are already into model railroads, then you won’t face any issues playing Pokemon Go. It would be the replica of a big railroad with miniature trains. Simply place your phone on a miniature train and let it revolve around the railroad to cover the distance. Just keep your phone safe and regulate the speed of the train to make sure that Pokemon Go won’t detect any fast movement. You would have to drive your train for a while to cover the distance, but you don’t have to walk to do it.

Way 9: Use A Turntable to Hatch Eggs without Walking Pokemon Go

Do you have a turntable? If yes, you are lucky! You can use it that you used to listen to music to trick Pokemon Go that you’re walking and hatch the eggs. Because the turntable creates enough motion in a wide enough circle that it will trick your phone’s internal sensors into thinking you’re walking. This trick is for anyone who wants to be a quick hatch in Pokemon Go! Here are the steps:

Place your phone on the outermost edge of the turntable > Turn on the turntable > Confirm if your eggs are starting to hatch. If not, readjust your device and try again.

Tips: Tired of walking to hatch eggs? Using Dr.Fone - Virtual Location to hatch Pokémon Go eggs without taking a step. Explore the world of Pokémon from the comfort of your home. Try it now and level up your Pokémon Go adventure!

Bonus Tip: The Different Types of Pokemon Eggs in Pokemon Go

In Pokemon Go, there are several types of Pokemon Eggs that you can collect. These eggs can be obtained by visiting PokeStops or by receiving them as rewards for completing certain in-game tasks. Once an egg is collected, you must walk a certain distance (ranging from 2 to 12 kilometers) to hatch the egg and reveal the Pokemon inside. You can use the ways mentioned above to hatch eggs in Pokemon Go without walking.

The types of eggs that can be collected in Pokemon Go include:

1. 2 km eggs - These eggs typically hatch common Pokemon, such as Pidgey or Caterpie.
2. 5 km eggs - These eggs can hatch a range of Pokemon, including some starters like Charmander and Squirtle, as well as rarer species like Dratini.
3. 7 km eggs - These eggs usually contain baby Pokemon, like Pichu or Togepi, as well as some Alolan forms.
4. 10 km eggs - These eggs are the rarest and can hatch some of the strongest and most sought-after Pokémon, such as Snorlax, Lapras, and even certain legendary Pokemon like Moltres or Zapdos.

Conclusion

Now that you know how to hatch eggs in Pokemon Go without walking in 9 different ways, using a professional location spoofer(like Dr.Fone - Virtual Location ), you can easily be a Poke master for sure. Go ahead and try some of these expert tips and tricks to hatch Pokemon eggs. Just be sure that the app would not detect that you are cheating else it can ban your profile. Also, consider your safety as the first priority and even protect your phone while implementing these tips in a secure way. For more tips and tricks, you can visit the Wondershare Video Community .

Also read: