Here are Some Pro Tips for Pokemon Go PvP Battles On Tecno Pop 8

“How to plan the PvP Pokemon matches and are there some strategies that I need to implement in the PoGo PvP battles?”

Ever since the Pokemon Go PvP mode has been introduced by Nintendo, there has been a lot of confusion among the players. Ideally, you can partake in a Pokemon PvP battle locally or remotely. It is a 3 vs. 3 battle in which you have to select your best Pokemons to fight with other trainers. To help you become a PvP Poke master, I have come up with this detailed guide that will certainly come in handy.

Part 1: Pro Strategies to Follow in PvP Pokemon Go Battles

If you want to be good at the Pokemon Go PvP battles, then you must understand how the game works. Once you are ready, I would recommend some of these Pokemon PvP strategies that are followed by pro players.

Tip 1: Start from the low leagues

As you know, there are three different leagues to participate in Pokemon Go PvP battles. If you are a beginner or don’t have too many Pokemons, then you should start from the lower categories and gradually climb your way up. You can find these three categories in the PoGo PVP mode:

• Great League: Max 1500 CP (per Pokemon)
• Ultra League: Max 2500 CP (per Pokemon)
• Master League: No CP limit

The Master Leagues is mostly reserved for pro players since there is no CP limit for Pokemons. The Great League is the best category to learn and try different Pokemon combinations.

Tip 2: Master all the Battle Moves

Ideally, there are four different moves in any PvP Poke battle that you must master. The more battles you partake in, the better you would become.

• Fast attacks: These are the basic attacks that are done more frequently than others.
• Charge attack: Once your Pokemon has enough energy, you can do a charge attack that would do more damage.
• Shield: This would shield your Pokemon from the enemy attacks. In the starting, you would only get 2 shields per battle.
• Swapping: Since you get 3 Pokemons, don’t forget to swap them during the battle. You can only swap Pokemons once in every 60 seconds.

Tip 3: Check your Opponent’s Pokemons

This has to be the most important thing that you should check before you start any Pokemon Go PvP battle. Right before starting the battle, you can check a list of the prospective opponents in your league. You can have a glimpse of their main Pokemons and pick your Pokemons accordingly so that you can counter their picks.

Tip 4: Know the current Meta

In nutshell, Meta Pokemons are the ones that are considered superior to other picks since they are more powerful. You might already know that some Pokemons are just stronger than others. Since Nintendo keeps balancing Pokemons with constant nerfs and buffs, you should do some research in advance.

There are several sources like the Silph Arena, PvPoke, and Pokebattler that you can check to know the current meta Pokemons.

Tip 5: Shield Baiting Strategy

This is one of the most effective Pokemon Go PvP strategies that you must try. You might already know that there are two kinds of charged attacks a Pokemon can do (mild and strong). During the battle, you need to first poke your enemy and have enough energy for both moves.

Now, instead of going with your ultimate attack, only perform the mild one. Your opponent might assume that you are going for an ultimate and would use their shield instead. Once their shield is used, you can go for a stronger attack to win.

Tip 6: Learn to Counter Fast Moves

To make the most of your shield and energy levels, you should learn how to counter moves. The first way to do this is by picking your Pokemons wisely. Your Pokemon would automatically get less damage if it can counter your opponent’s Pokemon.

During any PvP Poke battle, keep a count of your opponent’s moves to calculate when they would do a charged attack. Since you would only get 2 shields at the starting of the battle, make sure that you only use them at the time of need.

Click here

Tip 7: Sacrifice Swap

This might sound surprising, but sometimes we have to sacrifice a Pokemon in a fight to win the battle. For instance, you can consider sacrificing a Pokemon that is at low energy and won’t be of much help later.

In this way, you can swap it in the battle and let it take all the charge attack of your opponent. Once the Pokemon is sacrificed and has drained the opponent’s Pokemon, you can place another Pokemon to claim the victory.

Part 2: What Changes should be implemented in Pokemon Go PvP?

Even after the much-anticipated release of PoGo PvP, a lot of players are not satisfied with it. If Nintendo wants to improve Pokemon PvP and make their players happy, then the following changes should be made.

• The PvP Poke battles are based on the CP level of Pokemons instead of their IV levels, which is something most of the players dislike.
• Nintendo should focus on making the battles smoother as a lot of players encounter unwanted bugs and glitches.
• Apart from that, players also complain about unfair matchmaking in which pro players are often matched against beginners.
• The overall pool of Pokemons is not balanced – if a player has meta Pokemons then they can easily win the game.
• The PoGo PvP battles are more centric on the picks and less on the actual battle. Players would like more strategic moves and in-battle options to help them fight.

Part 3: How to Select the Best Pokemons for PvP Battles?

During any Pokemon PvP battle, the type of Pokemons you pick can either make or break the results. Firstly, consider the following things in mind before you start any PvP Poke battle.

• Team composition

Try to come up with a balanced team that would have both defensive and attacking Pokemons. Also, you should include Pokemons of different types in your team.

• Focus on attacks

Presently, some attacks like thunderbolt are considered extremely strong in PoGo PvP battles. You should get to know about all the major attacks of your Pokemons to pick the best ones.

• Consider Pokemon Stats

Most importantly, you should be aware of the defense, attack, IV, CP, and all the vital stats of your Pokemons to pick the best ones in the league of your choice. Besides that, you should also do some research about the Meta tier in Pokemon PvP to know the best picks of the present time.

Most of the experts consider the following points while picking any Pokemon in PvP battles.

• Lead

Firstly, focus on getting a Pokemon that can help you maintain a lead in the battle right from the start. You can consider getting Altaria, Deoxys, or Mantine as they are the strongest attackers.

• Attacker

If you want to fight more aggressively in the Pokemon PvP battle, then consider getting some attackers like Bastiodon, Medicham, and Whiscash.

• Defender

While making your Pokemon PvP team, make sure that you have at least one strong defender like Froslass, Zweilous, or Swampert.

• Closer

In the end, make sure that you have a perfect Pokemon that can end the battle and secure a win. Pokemons like Azymarill, Umbreon, and Skarmory are some of the best closers.

Part 4: Secrets about the new Mechanics in PvP Pokemon Go Battles

Lastly, if you want to level up in PvP Poke battles, then you should get to know about these three important mechanisms.

• Turns

Make sure that you keep an eye on the DTP and EPT values as they would indicate how much damage and energy is left. In the new mechanism, everything is about taking turns in 0.5 seconds. This will help you not only counter but also implement your moves before your opponent.

• Energy

You might already know that every Pokemon starts with 100-value energy. While switching Pokemons, make sure that you remember their energy value as that would be retained later on. The energy value of every Pokemon will also help you make a charged move in time.

• Switching

Switching is another strategic account in the new mechanism of Pokemon PvP battles in which we enter new Pokemons to the battle. Please note that the switching action has a 60-second cooldown window and you would only get 12 seconds to choose your next Pokemon.

There you go! I’m sure that after reading this post, you would be able to know every important thing about PvP Poke battles. From the meta Pokemons for PvP battles to essential mechanisms, I have listed it all in this guide. Now, it is time for you to implement these tips and become a Pokemon Go PvP champion in no time!

How and Where to Find a Shiny Stone Pokémon For Tecno Pop 8?

Shiny Stone Pokémon is an important evolution item in Pokémon Sword and Shield. If you are a Pokémon player, you understand how great it is to capture a Shiny Stone. However, the Shiny Stone is a rare item, and you will have to put more work to grab one. In this article, we will to explain to you everything you ought to know about Shiny Stone Pokémon, including how to get them with less effort. Let’s get started.

Part 1. Shiny Stone Pokémon

What is Shiny Stone Evolution?

A Shiny Stone is an item in Pokémon Go that is used to evolve certain Pokémon. Shiny Stone was introduced in Generation IV and is no different from other evolution stones such as dusk stones, dawn stone, and ice stone, to mention but a few. The major differences could be their location as well as the type of Pokémon they help to evolve. You can identify this peculiar stone by its dazzling, shining light.

How and where to find a Shiny Stone evolution

In Pokémon Sword and Shield, the easiest way to get any evolution stone, including Shiny Stone, is by completing poke jobs. When you earn a water badge and then the gym badge, you can access the third tier poke jobs. Everything further will depend on whether your Pokémon perform great in their assigned jobs. If it performs great, you will be rewarded with an evolution stone that could be a Shiny Stone. If you want your Pokémon to do a great job, make sure you meticulously read through the summary of every given poke job. This is vital because it provides you a clue of what Pokémon you should pick.

Shiny Stone Evolution

In Pokémon Go, Shiny Stone is used to evolve certain Pokémon species. The following are some of the Pokémon that evolve using Shiny Stone. Evolving them is pretty simple. Just launch the menu and navigate to the bag. Select the “Other items” tab and use it to evolve any of the Pokémon listed below.

1. Roselia

Roselia is small, light green in color grass and poison type Pokémon. It has stats of 50 hp, 60 attacks, 65 speed, and 45 defense. This Pokémon was introduced in Generation III and had three thorns on its head and black eyes with long eyelashes. It holds a rose on the one hand and a red one on the other hand. Its aroma draws serenity, but the thorns on its head contain poison. The healthier it is, the stronger its aroma is. This Pokémon evolves from Budew through friendship level up in the day. When it is subjected to a Shiny Stone, it evolves into Roserade.

2. Minccino

This is a normal type of Pokémon that was introduced in Generation 5. It is also referred to as Chinchilla Pokémon. Its abilities include cute charm, technician, and skill link. Its stats are hp-55, attack-50, defence-40, speed-75, and total combat points-75. A Minccino evolves into a Cincino using a Shiny Stone. In Pokémon Sword and Shield, Minccino is located in rolling fields, East Lake Axewell, Route 5, and Giant’s cap.

3. Togetic

Togetic is a fairy and flying type of Pokémon that has ten hatch cycles. Its abilities include hustle, serene grace, and super luck. Togetic itself evolves from Togepi with leveled up friendship through camp play and cooking curry. It can float in midair without having to flip it wings. It appears and showers happiness to kindhearted and caring people. It, however, becomes dispirited if it encounters people who aren’t kind. Togetic is located in Stony Wilderness and from an evolving Togepi. Togetic evolves to Togekiss with the help of a Shiny Stone.

Part 2. Tricks and Hacks to Find Shiny Stone Pokémon

Finding a Shiny Stone in Pokémon Sword and Shield is challenging because it is a rare item. Nevertheless, some hacks and tricks can reduce your curve of finding a Shiny Stone, as explained below.

1. Use the iOS spoofing tool-Dr. Fone Virtual Location

Since the game of Pokémon is location-based, you can fake your GPS location by simply teleporting to an appropriate Shiny Stone location while you are seated at your home. This is achievable with the help of Dr. Fone Virtual Location . The program is powerful, simple, and easy to use. You can teleport to whatever place you want, simulate movements along a route set by two or multiple points. To teleport to the location where it is easier to grab a Shiny Stone using Dr. Fone Virtual Location, follow the steps below.

Step 1. Download and install Dr. Fone Virtual Location on your computer. Now run it and click on the “Virtual Location” tab.

Step 2. After that, connect your iOS to the PC and click the “Get Started” button.

Step 3. On the next page, click the third icon on the top-right to provide the teleport mode. Choose the location you want to teleport to within the filed at the top and press “Go.”

Step 4. Click “Move Here” on the dialog box that pops up once the program finds the location.

2. Use Android spoofing tool- Pgsharp

Pgsharp i8s an Android application that enables users to be fake their GPS location and fools location-based apps like Pokémon Go to enter a territory that is easy to grab a Shiny Stone or Pokémon. It has a joystick feature for easy and smooth movement, coordinates to move to specific locations, auto walkthrough several pokestops, and saves your last location, among others.

3. Use a Drone

Some YouTube channels teach you how to use drones to cheat in Pokémon Go. A good example of a drone is DJI PantomDrone. When this drone is integrated with some smart software, you can easily control a phone that is attached to the drone. This way, you can sit at home while visiting gyms and pokestops.

Catch or Beat Sleeping Snorlax on Pokemon Go For Tecno Pop 8

Embracing new challenges and seeking out rare creatures to add to their Pokédex consistently excites Pokémon GO players. The coveted reward for players globally, Snorlax, a legendary Pokémon, is widely recognized as the iconic Sleeping Snorlax. Despite being one of the original 151 Pokémon in Pokémon GO, capturing Snorlax remains exceptionally challenging. It falls under Z’s category of Pokémons, which also includes Komala and Abra.

This makes it a unique challenge for trainers seeking to add this heavyweight Pokémon to their collection. In this guide, we will go through the latest strategies and updates in the Pokémon GO universe. The aim is to reveal the secrets to catching a Pokémon Sleeping Snorlax in 2024. Read the article as we explore the techniques, locations, and special events that will increase your chances of capturing this Pokémon.

Part 1: What Is a Sleeping Snorlax in Pokémon GO

Part of the original 151 creatures in Pokémon GO, Snorlax is a Pokémon from the Pokémon franchise. It stands out as a normal type with notable Combat Power (CP) and endurance. Its substantial Hit Points (HP) and powerful moves make it a formidable defender in gyms, earning it a reputation as a resilient fighter.

Being one of the Z’s category Pokémon, known for their sleepy and relaxed nature, is reflected in its appearance. Snorlax Pokémon sleeping is a large, bear-like Pokémon with a big belly and is often found blocking paths in mainline Pokémon games.

In Pokémon GO, Snorlax can be encountered in the wild, but it is more commonly obtained through special events or raids. Like other Pokémon, Snorlax can be powered up and used in battles against other trainers or in raids. Below is a detailed table explaining everything about Snorlax:

Part 2: Is It Possible To Capture a Sleeping Snorlax in Pokémon GO?

When it comes to whether it is possible to capture a Snorlax sleeping Pokémon, the answer is a resounding yes. Being rare, the chances to encounter and capture have steadily risen compared to past years. With its formidable stats, Snorlax reaches an impressive maximum Combat Power (CP) of 3884.

At Pokémon Z’s Event 2023, participants had the chance to capture not only Snorlax but also its rare shiny variant. Moreover, after completing the special research task, users were able to encounter a Snorlax with a nightcap. To get Snorlax more easily, users are recommended to use Pokémon Go Plus +.

Utilizing advanced Bluetooth and low-energy technology, the Pokémon GO Plus + device establishes connections with both the Pokémon Sleep and Pokémon GO mobile applications. Its functionality extends to monitoring sleep, a feature it shares with Pokémon Sleep. All you need to do is hold the central button, put it near you, and go to sleep. It includes a Pikachu to sing you lullabies and work as a morning alarm.

Moreover, the Pokémon GO Plus + accessory facilitates the spinning of PokéStops. It enables the automatic throwing of different Poké Balls, Great Balls, and Ultra Balls. Thus eliminating the need to press any buttons. Below is a detailed table about the specifications of Pokémon GO Plus + to capture Snorlax sleeping Pokémon:

Thickness: 18.3mm

|
| Device Weight | 50g |
| Internal Battery |

Lithium-ion battery

Charges via USB Type-C

|
| Battery Charging Time | 3.5 Hours |
| Functions | Vibration and sounds |
| Platform/OS |

Android 7 and up

iOS 14 and up

|

Part 3: How To Catch a Sleeping Snorlax With the Help of Pokémon GO Plus+

With the release of Pokémon GO Plus + in July 2023, Nianticreleased a week-long “Catching Some Z’s” event. The main part of the event was to increase the spawned rate for Snorlax and a special encounter with a Snorlax with a nightcap. While the event has long finished, Pokémon GO Plus + remains.

Many users have reported increased sightings of Snorlax even after the event when using Pokémon GO Plus +. As discussed earlier, Pokémon GO Plus + uses Bluetooth to remain connected with the Pokémon GO app. Here are the steps you need to follow to pair Pokémon GO with the Pokémon GO Plus + for help in catching Pokémon Snorlax sleeping:

• Step 1. Begin by enabling Bluetooth, opening the Pokémon GO app on your device, and tapping the central Pokéball button. Now tap “Settings” from the top right corner and select “Connected Devices and Devices.”

• Step 2. On the following screen, press “Accessory Devices” to access the pairing menu. Now, move to Pokémon GO Plus + and press the main button. Once it appears in the “Available Devices” section of the Pokémon GO app, begin the pairing process following the on-screen instructions.

Part 4: Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Are you having issues with capturing Pokemon Snorlax sleeping despite employing Pokémon GO Plus +? Given the rarity and low spawning rate, capturing Snorlax can be hard. This becomes especially difficult if you are unable to travel long distances. To come to your rescue, there’s another useful tool at your disposal named Wondershare Dr.Fone - Virtual Location. Enabling you to simulate your location anywhere globally, it also incorporates lifelike movement.

With just one click, modify your GPS location effortlessly using this tool that smoothly integrates with both iOS and Android devices. This means you can easily explore diverse in-game terrains. It increases your chances of encountering Snorlax Sleeping Pokemon in various locations. Wondershare Dr.Fone gives you precise control over your virtual location, ensuring that you can navigate the Pokémon GO map with accuracy.

Standout Features of Dr.Fone - Virtual Location

1. Effortlessly import/export GPX files containing diverse paths, enabling you to save and view your preferred routes with a simple click.
2. When spoofing your GPS location on an iOS device, you don’t need to jailbreak it when using Dr.Fone - Virtual Location.
3. It offers you the flexibility to traverse at various simulated speeds, such as walking, cycling, driving, etc., ranging from 3.6 km/h to 108 km/h.

Steps To Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Save time and energy by using Wondershare Dr.Fone - Virtual Location feature. There is no need to physically travel to different places by simply adjusting your virtual location.

When coupled with powerful Pokémon GO Plus +, it can increase your chances of encountering Sleeping Snorlax significantly. Here is how to enhance your gaming experience and get help in capturing Pokémon sleeping Snorlax via Dr.Fone - Virtual Location:

• Step 1. Activate Teleport Mode in Dr.Fone - Virtual Location

Open Wondershare Dr.Fone - Virtual Location, connect your smartphone with an original USB cable, and choose the “Teleport Mode” option located in the top-right section. The specific icon for Teleport Mode is the first one from the left in that section. Once Teleport Mode is activated, click on the search bar at the top-left to input the desired location. After entering the location, press “Enter” to continue.

• Step 2. Teleport to the Chosen Location

As you enter the desired location, the map will confirm your selection. If you wish to teleport to this designated location, click on “Move Here.” The smartphone’s location will promptly switch to the chosen destination and reflect on the map. You can then verify that the Tecno Pop 8 device’s current location matches the updated location by opening the maps app on the Tecno Pop 8 device.

• Step 3. Simulate Movement with One-Stop Route

To simulate movement, navigate to the top-right section and click “One-Stop Route.” It is the third icon from the left. After moving to the desired location, tap anywhere on the map to designate your destination. Specify the number of round trips and opt for either a Round or Loop trip. Adjust the walking speed by sliding the speed option. Finally, tap “Move Here” for the movement simulation.

• Step 4. Enable the Multi-Stop Route Feature

If you want to visit more than one stop, enable the Multi-Stop Route mode. You can do it by accessing the top-right section adjacent to the One-Stop Route mode. Once activated, designate multiple locations on the map by selecting your desired points. Specify the number of trips and speed settings. Initiate the process by clicking on “Start Moving.” During the simulation, you can “Pause” the sequence at any point.

Conclusion

In conclusion, the pursuit of capturing a Snorlax Pokémon sleeping in Pokémon GO is an ever-evolving adventure. To enhance your gaming experience and increase your chances of success, consider incorporating Wondershare Dr.Fone - Virtual Location. With its one-click location spoofer, Dr.Fone adds versatility and efficiency to your exploration. It allows you to enjoy the thrill of the hunt without physical constraints.