Here are Some Pro Tips for Pokemon Go PvP Battles On Motorola Moto E13

“How to plan the PvP Pokemon matches and are there some strategies that I need to implement in the PoGo PvP battles?”

Ever since the Pokemon Go PvP mode has been introduced by Nintendo, there has been a lot of confusion among the players. Ideally, you can partake in a Pokemon PvP battle locally or remotely. It is a 3 vs. 3 battle in which you have to select your best Pokemons to fight with other trainers. To help you become a PvP Poke master, I have come up with this detailed guide that will certainly come in handy.

Part 1: Pro Strategies to Follow in PvP Pokemon Go Battles

If you want to be good at the Pokemon Go PvP battles, then you must understand how the game works. Once you are ready, I would recommend some of these Pokemon PvP strategies that are followed by pro players.

Tip 1: Start from the low leagues

As you know, there are three different leagues to participate in Pokemon Go PvP battles. If you are a beginner or don’t have too many Pokemons, then you should start from the lower categories and gradually climb your way up. You can find these three categories in the PoGo PVP mode:

• Great League: Max 1500 CP (per Pokemon)
• Ultra League: Max 2500 CP (per Pokemon)
• Master League: No CP limit

The Master Leagues is mostly reserved for pro players since there is no CP limit for Pokemons. The Great League is the best category to learn and try different Pokemon combinations.

Tip 2: Master all the Battle Moves

Ideally, there are four different moves in any PvP Poke battle that you must master. The more battles you partake in, the better you would become.

• Fast attacks: These are the basic attacks that are done more frequently than others.
• Charge attack: Once your Pokemon has enough energy, you can do a charge attack that would do more damage.
• Shield: This would shield your Pokemon from the enemy attacks. In the starting, you would only get 2 shields per battle.
• Swapping: Since you get 3 Pokemons, don’t forget to swap them during the battle. You can only swap Pokemons once in every 60 seconds.

Tip 3: Check your Opponent’s Pokemons

This has to be the most important thing that you should check before you start any Pokemon Go PvP battle. Right before starting the battle, you can check a list of the prospective opponents in your league. You can have a glimpse of their main Pokemons and pick your Pokemons accordingly so that you can counter their picks.

Tip 4: Know the current Meta

In nutshell, Meta Pokemons are the ones that are considered superior to other picks since they are more powerful. You might already know that some Pokemons are just stronger than others. Since Nintendo keeps balancing Pokemons with constant nerfs and buffs, you should do some research in advance.

There are several sources like the Silph Arena, PvPoke, and Pokebattler that you can check to know the current meta Pokemons.

Tip 5: Shield Baiting Strategy

This is one of the most effective Pokemon Go PvP strategies that you must try. You might already know that there are two kinds of charged attacks a Pokemon can do (mild and strong). During the battle, you need to first poke your enemy and have enough energy for both moves.

Now, instead of going with your ultimate attack, only perform the mild one. Your opponent might assume that you are going for an ultimate and would use their shield instead. Once their shield is used, you can go for a stronger attack to win.

Tip 6: Learn to Counter Fast Moves

To make the most of your shield and energy levels, you should learn how to counter moves. The first way to do this is by picking your Pokemons wisely. Your Pokemon would automatically get less damage if it can counter your opponent’s Pokemon.

During any PvP Poke battle, keep a count of your opponent’s moves to calculate when they would do a charged attack. Since you would only get 2 shields at the starting of the battle, make sure that you only use them at the time of need.

Tip 7: Sacrifice Swap

This might sound surprising, but sometimes we have to sacrifice a Pokemon in a fight to win the battle. For instance, you can consider sacrificing a Pokemon that is at low energy and won’t be of much help later.

In this way, you can swap it in the battle and let it take all the charge attack of your opponent. Once the Pokemon is sacrificed and has drained the opponent’s Pokemon, you can place another Pokemon to claim the victory.

Part 2: What Changes should be implemented in Pokemon Go PvP?

Even after the much-anticipated release of PoGo PvP, a lot of players are not satisfied with it. If Nintendo wants to improve Pokemon PvP and make their players happy, then the following changes should be made.

• The PvP Poke battles are based on the CP level of Pokemons instead of their IV levels, which is something most of the players dislike.
• Nintendo should focus on making the battles smoother as a lot of players encounter unwanted bugs and glitches.
• Apart from that, players also complain about unfair matchmaking in which pro players are often matched against beginners.
• The overall pool of Pokemons is not balanced – if a player has meta Pokemons then they can easily win the game.
• The PoGo PvP battles are more centric on the picks and less on the actual battle. Players would like more strategic moves and in-battle options to help them fight.

Part 3: How to Select the Best Pokemons for PvP Battles?

During any Pokemon PvP battle, the type of Pokemons you pick can either make or break the results. Firstly, consider the following things in mind before you start any PvP Poke battle.

• Team composition

Try to come up with a balanced team that would have both defensive and attacking Pokemons. Also, you should include Pokemons of different types in your team.

• Focus on attacks

Presently, some attacks like thunderbolt are considered extremely strong in PoGo PvP battles. You should get to know about all the major attacks of your Pokemons to pick the best ones.

• Consider Pokemon Stats

Most importantly, you should be aware of the defense, attack, IV, CP, and all the vital stats of your Pokemons to pick the best ones in the league of your choice. Besides that, you should also do some research about the Meta tier in Pokemon PvP to know the best picks of the present time.

Most of the experts consider the following points while picking any Pokemon in PvP battles.

• Lead

Firstly, focus on getting a Pokemon that can help you maintain a lead in the battle right from the start. You can consider getting Altaria, Deoxys, or Mantine as they are the strongest attackers.

• Attacker

If you want to fight more aggressively in the Pokemon PvP battle, then consider getting some attackers like Bastiodon, Medicham, and Whiscash.

• Defender

While making your Pokemon PvP team, make sure that you have at least one strong defender like Froslass, Zweilous, or Swampert.

• Closer

In the end, make sure that you have a perfect Pokemon that can end the battle and secure a win. Pokemons like Azymarill, Umbreon, and Skarmory are some of the best closers.

Part 4: Secrets about the new Mechanics in PvP Pokemon Go Battles

Lastly, if you want to level up in PvP Poke battles, then you should get to know about these three important mechanisms.

• Turns

Make sure that you keep an eye on the DTP and EPT values as they would indicate how much damage and energy is left. In the new mechanism, everything is about taking turns in 0.5 seconds. This will help you not only counter but also implement your moves before your opponent.

• Energy

You might already know that every Pokemon starts with 100-value energy. While switching Pokemons, make sure that you remember their energy value as that would be retained later on. The energy value of every Pokemon will also help you make a charged move in time.

• Switching

Switching is another strategic account in the new mechanism of Pokemon PvP battles in which we enter new Pokemons to the battle. Please note that the switching action has a 60-second cooldown window and you would only get 12 seconds to choose your next Pokemon.

There you go! I’m sure that after reading this post, you would be able to know every important thing about PvP Poke battles. From the meta Pokemons for PvP battles to essential mechanisms, I have listed it all in this guide. Now, it is time for you to implement these tips and become a Pokemon Go PvP champion in no time!

Why is iPogo not working On Motorola Moto E13? Fixed

The popular iPogo app is one of the best free apps you can use to spoof on your device while playing Pokémon Go. It is equipped with an abundance of features that allows players to get way ahead in the game by spotting spawns early, catching gym raids, discovering nests and quest events, and so on. If you spot a Pokémon which is way too far from your location, you can use iPogo to fake your virtual coordinates and trick Pokémon Go to think you are nearby that area. Sounds like an amazing app to use right? But, there is a downside to it too as users of the app have repeatedly reported of iPogo not working. The app seems to overload and malfunction after a few hours of repeated usage. This issue is preventing users from harnessing the full potential of their gaming experience.

Why Users download iPogo?

iPogo is a free to use Pokémon Go++ mod which can be downloaded as an APK file for your iOS devices. It features tools that can be used by players to play the game virtually anywhere in the world while also enhancing the gameplay experience. Few of these exclusive features have been mentioned in the list below;

• The Spin and Auto-cash feature can be used to capture Pokémon and throw a spinning ball without requiring a physical device.
• With just one click you can manage your collection of stored items. It removes the cumbersome ordeal of the game to manually select and delete items when you can erase all un-required items with just one tap.
• If you are on the hunt for special shiny Pokémon, you can do so without having to go through dozens of non-shiny one’s. On activating the Auto-Runaway feature on your iPogo, you can skip through the time consuming animations of all non-shiny Pokémon.
• You can augment the game to let your avatar walk continuously at a desired pace. The speed of your avatar’s movement can be adjusted using iPogo.
• If there are unnecessary elements crowding up your screen, you can hide them temporarily.
• You keep track of Pokémon spawns, quests and raids using the feed on your iPogo.

With all these amazing benefits at hand, it seems almost unfair to not be able to make the best of it if iPogo keeps crashing or stops working. Let’s look into the probable reasons why your iPogo is not working and explore methods to solve this dilemma.

Part 1: Common problem that iPogo is not working

Pokémon Go players have made several reports of how iPogo is not functioning normally on their devices. For instance, while using the Plus mod on Pokémon Go, the Motorola Moto E13 device screen goes completely black and unresponsive making the game inaccessible. Also, devices that run Pokémon Go with iPogo seems to be running slower than those which do not use any helper or spoofing support.

Even if your device is able to withstand the load of using iPogo, it may still be possible to face other app related performance issues like ipogo enhanced-throw not working, ipogo joystick not working and ipogo feeds not working either. All these symptoms sums up the fact that the iPogo app is faltering on your device.

Read on to understand the reasons why your device is unable to run the iPogo mod smoothly;

• One of the root causes which explains why iPogo is crashing could be because you are utilizing too much of your phone’s system resource capacity. This means you have too many tabs or other applications opened on your device that is making the resource distribution falter leading to an automatic shutdown.
• Another plausible reason could be that your iPogo application has not been properly installed. It is widely agreed upon that iPogo is a difficult app to install as it involves going through complex steps making it easier for mistakes to be made, eventually leading to a complete breakdown of the software.
• Since installing iPogo is a cumbersome process, players would often resort to using downloading hacks to get the job done faster. However, not all such hacks can be relied upon as they may end up jail breaking your device or make your version of the app even more unstable.

Some Easy Solutions for fixing the “iPogo not working” issue

It is often said that short cuts can cut you short or in this case, hacked! Disrupting the framework of your device is not price you should pay for enjoying the game at its best. Although, there are other safer and more reliable solutions to making the iPogo app run better on your iOS device. Let’s take a brief peak at some of them.

• Limiting the usage of System Resources: Let’s keep in mind that it is unwise to keep too much on your plate and rightfully so. In this case, the more applications you keep active on your shortcut bar, the lesser resources your CPU has left to allocate to the iPogo app. Therefore, close off all other unnecessary applications before launching iPogo as it is already a heavy enough application to run on its own.
• Too many Items opened: Keep a tight check on your list of inventory while playing Pokémon Go using iPogo. Remember to delete all un-required collected items as it may be taking up too much space and wasting precious system resources.
• Keep you Device Clean: Not essentially in the literal sense but yes, it is indeed important to clean up your device often. Use a cleaner app that deletes and clears all those extra cache files that becomes the primary reason of system lag on your iOS device.
• Install the Official Version: It may be tempting for anyone to install the app using shortcut hacks, but that’s all they are – just hacks! Installing iPogo seem like the long way but it is the right way on all accounts. There are three methods you can use to integrate the official iPogo app, all of which has been made more simplified.

Method 1: Use the three-step app installation method which is direct and free to use.

Method 2: If you are opting for a matrix installation, in which case you will need a PC installed with either Windows, LINUX or MacOS.

Method 3: The Signulous method is a premium mod that gives the player access to additional features.

Note: All of these installation methods have specific varied requirements which must be checked appropriately.

Part 2: A better alternative for iPogo - virtual location

If using the iPogo mod to enhance your gaming experience on Pokémon Go seem less appealing with all the added hassle then there is a better alternative for you to use. You can employ a much simpler and easier to install GPS mocking application like Wondershare’s Dr.Fone Virtual Location . It offers amazing user-friendly features like speed modulation, joystick control and map routing with none of the drawbacks that you had to previously overcome. It is a highly efficient virtual location tool that can be used to conveniently spoof your location without running the risk of detection on a GPS based game like Pokémon Go.

Primary Features of Dr. Fone

• Adjust the speed of travel with three speed modes, like walking, cycling or even driving.
• Manually move your GPS on the map freely using a virtual joystick in a 360 degree direction.
• Simulate your avatar’s movements to travel on a determined route of your choice.

Step by Step Tutorial

You can follow these easy steps to teleport to anywhere in the world with the help of drfone Virtual Location.

Step 1: Run the Program

Begin with downloading Dr.Fone – Virtual Location (iOS) on your PC. Then, install and launch it. To proceed, make sure to choose “Virtual Location” tab given on the main screen.

Step 2: Plug iPhone

Now, grab your iPhone and get it connected with the PC using the lightening cable. Once done, hit on “Get Started” to begin spoofing.

Step 3: Check Location

You will notice a map on the screen now. As it comes, you got to click on ‘Centre On’ to accurately pin point the GPS to your location.

Step 4: Enable Teleport Mode

Now, you are required to turn on the ‘teleport mode’. To do this, simply click on the first icon on the upper right hand corner. After that, enter the location you want on the upper right field and then hit ‘Go’.

Step 5: Start Teleporting

Once you enter the location, a pop-up will appear. Here, you can see the distance of the location you have chosen. Click on ‘Move here’ in the pop up box and you are good to go.

Now, the location is changed. You can now open any location based app on your iPhone and check the location. It will show the location you have selected.

Conclusion

Pokémon Go Plus mods like iPogo involves a certain degree of care in order to have a healthy game experience. Be sure to take pre-emptive measures suggested in this article and you would notice your device running smoothly in no time.

How to use iSpoofer on Motorola Moto E13?

iSpoofer is a location spoofer that allows you to change your location on your device. This is useful for games like Pokemon Go, where you can catch Pokemons from different regions without leaving your home. However, iSpoofer is not available for download anymore. If you are looking for an alternative to iSpoofer, you can use Dr.Fone Virtual Location. Here’s how you can use Dr.Fone Virtual Location to spoof your location on your Motorola Moto E13.

iSpoofer is one of the most useful tools for iOS users, that’s designed to simulate a user’s GPS location. With iSpoofer, you can change your current location to anywhere in the world and access geo-restricted content without any hassle. While the tool has several real-world applications, the majority of users use iSpoofer to fake their location to catch rare Pokemon in Pokemon Go.

Since iSpoofer is an extremely reliable app, even Android users want to know if they can use it on their smartphones or not. If you’re one of them, this guide will help. In today’s article, we are going to discuss if you can download iSpoofer for Android or not and what are some of the best solutions to fake GPS location on an Android device.

So, without any further ado, let’s get started.

• Part 1: Can I download the iSpoofer on Android
• Part 2: Common ways to spoof on Android

Part 1:  Can I download the iSpoofer on Android

Unfortunately, iSpoofer isn’t available for Android. It’s an exclusive geo spoofing app that only works on iOS devices. In fact, all its features are tailored for the iOS ecosystem only. So, if you have an Android device, you won’t be able to download iSpoofer for Android at all.

However, the good news is that you don’t need iSpoofer to fake GPS location on an Android smartphone. There are dozens of Android-specific location spoofing apps that’ll help you simulate the GPS location and play Pokemon Go with a fake location. Some of these tools also come with a dedicated GPS Joystick feature, which means you’ll also be able to control your movement while sitting at one spot.

Part 2:  Common ways to spoof on Android

When it comes to choosing the right location spoofing methods for Android, you’ll have to be extra cautious. Why? Because there are many fake GPS apps on Android that aren’t reliable and may damage your smartphone’s overall functionality as well.

Here are some of the most common ways to spoof location on Android devices.

1. Use VMOS

VMOS is an application that lets users set up a virtual machine on their Android device. This means that you’ll be able to set up two different Android systems on the same device. What makes VMOS the right tool for geo spoofing on Android is the fact that it offers a one-click root enable feature. You can easily root your virtual Android OS without damaging the firmware of the primary OS. This way you’ll be able to install professional location spoofing tools and change your GPS location without any hassle.

The only downside of using VMOS is that it’s extremely hard to set up and manage. First and foremost, you’ll need different tools to successfully set up the virtual OS on your device. Secondly, VMOS is heavy software and if your smartphone doesn’t have decent configurations, it may even slow down the overall processing.

2. Root Your Device

Another way to fake location on Android is to root your device. Rooting an Android device will allow you to install third-party spoofing apps that offer extensive functionality. However, when you’ll root your device, you won’t be able to claim its warranty anymore. So, in case you don’t want to void your smartphone’s warranty, ‘rooting’ may not be the right solution to fake your location in Pokemon Go.

3. Use PGSharp

PGSharp is one of the best alternatives to iSpoofer for Android. It’s a tweaked version of the original Pokemon Go app that comes with a few additional features such as spoofing and GPS Joystick. The best part about using PGSharp is that it’s compatible with all Android devices. You won’t have to root your device to install and run PGSharp.

You can either choose the free or the paid version of the app. Of course, the latter comes with a few additional features, but if you only want to fake location in Pokemon Go, the free version of PGSharp will get the job done as well.

Note: Keep in mind that PGSharp isn’t available on Google Play Store and you’ll have to download it from the official PGSharp website.

Extension: safest way to spoof on iOS- Dr.Fone virtual location

So, that’s how you can fake GPS location on an Android device and collect different types of Pokemon in Pokemon Go. Even though iSPoofer isn’t available for Android, you can still use the above three methods to mock location without any effort.

It’s also worth noting that iSpoofer is permanently shut down and you can no longer install it on iOS devices as well. Even the iSpoofer website is down and if you want to fake location on your iPhone/iPad, you’ll have to look for other options. One of the best ways to change GPS location on an iOS device is to use Dr.Fone - Virtual Location (iOS). It’s a professional geo spoofing tool for iOS that comes with a wide variety of features to mock location on Motorola Moto E13s.

It has a dedicated “Teleport Mode” that’ll allow you to change your current location to anywhere in the world. You can even set a fake location using its GPS coordinates. Like iSpoofer, Dr.Fone - Virtual Location (iOS) also comes with the GPS Joystick feature. This means you’ll be able to catch different types of Pokemon without moving at all.

Here are a few key features of Dr.Fone - Virtual Location (iOS).

• Change your current location with a single click
• Use GPS coordinates to find locations
• Virtually control your GPS movement using the Joystick feature
• Customize your movement speed while walking in different directions
• Compatible with all iOS versions

Follow these steps to change your GPS location on an iDevice using Dr.Fone - Virtual Location (iOS).

Step 1 - Install the Dr.Fone toolkit on your computer and launch the software. Click “Virtual Location” and connect your iPhone to the computer using a lightning cable.

Step 2 - Once the tool recognizes your device, click “Get Started” to proceed further.

Step 3 - You’ll be prompted to a map that’ll point to your current location. Select “Teleport Mode” from the top-right corner and use the search bar to find the desired location.

Step 4 - The pointer will move to the selected location automatically. Finally, click “Move Here” to set it as your new location.

That’s how you can change GPS location on an iPhone/iPad using Dr.Fone - Virtual Location (iOS).

Also read: